no he will just drive off trailing the cones behind like he just got hitched :D
Type: Posts; User: hvacrjones
no he will just drive off trailing the cones behind like he just got hitched :D
they also make that meter under the crapman name. overall its a good value. but then agin i dont like flukes habbit of never making one meter with everything a hvac tech needs.
I have used my dewalt for a few fireplaces but it dose not have the capacity if you are looking at sucking out the lazy man ash shoots. There is one specifictly made for ash cleanup but i dont...
Ran into a new toy from Coast today at homy-D's its a flashlight stand/magnet has two legs that clip to most cost flashlight bodys can be flexed to use as a stand or magnets will keep it most...
I have had many Klein 6 in 1 and 10 in 1 have not had the 11 in 1. in comparison the the 6 and 10 in 1 kleins to the irwin the irwin is a tool the klein is a toy. have been using the same irwin for...
Irwin best built that I have found
http://www.irwin.com/irwin/consumer/images/large/2051100_lg.jpg
a nut driver is a hand tool like a screw driver. a nut setter goes on your drill.
lol :D:p:eek:
the sad thing is its true the space pen thing that is
most likly the brand harris 45 is a blue flux rod easy flow 45 is a non fluxed roll that you use stay-silv white past flux with. I do not know who makes the orange flux (maby sunkist :p)
the biggest consern on a compresor connection is vibration the higher the silver content the more flexible the joint will be. I would sugest harris 45 it is a blue flux coted brazing rod.
thanks for the info curmudgeon but I think I'll stick with my $100 veto LC.
just go all out and get a fenix tk10 with 225 lumens you dont even need the stun gun:D
looking for manual and wiring diagram for a lennox modle # cb19-51-3p air handler. homeowner/moron made a mess out of the wiring. Thinking about just making it work the way I would like but also...
I use ercolina benders every day and they are bomb proof but you need to be bending a lot of pipe to justify even the thought of these.
up to 3/4 we do by hand
7/8 through 1 5/8 we use the 070...
nice to see that im not the only refco user out there. Now i just wish they would make there star manifold in 4 valve.
I have used one one time I had no problems and did not see anything that screamed a problem waiting to happen. My personal one is a Bacharach it has never failed me except when i do something stupid...
The best gauges I have used are on my manifold now. Their Refco class 1 bellows gauges. They claim to be able to handle 2.5 times over pressure without effecting accuracy. they also have a nice...
No disrespect taken I myself will 9 times out of 10 take oxy/ace over Mapp but I do believe it has its place in your bag of tricks. Now most guys may never have the fun of climbing up a 40 foot...
Joe I beleve that I'm that certain member your taking about I wish i had a video recorder but I don't. All I can say is using a standard mapp cylinder and a bernzomatic TS8000 hand torch I just...
jojoe33 in truth to make a fully bonded braze with sil-fos 6 1425*F is all you need. there is no need to get a glowing red pipe for a full strenth braze you simply need to get the pipe hot enugh for...
Just how mutch heat do you think you need? Sil-fos 6 is the rod i use for most copper to copper it has a solidus melting point at 1190*F and a liquidu flowing at 1425*F. I would have no problem...
oxy/Mapp = 5301*F oxy/Acetlene = 5589*F or 288*F diffrence
Air Mapp = 3650*F Air Acetlene = 4350*F or 700*F diffrence
Thanks for the clarification I am a bit of a tool hog so i pack in more than you. So i simply rope up my prime bag with the filters and cleaners. the one tool you dont list that I tend to take to...
Mapp can be just fine for 7/8 with the right torch head. I have used it in a pinch at the end of a 40 foot extention ladder fixing a 1 3/8 line it worked but took a while. the secret to mapp is...
what do you consider a PM to be. There is no way I could even start to do a pm limited to what you have listed as your tools.
has anyone tried the Makita 7.2V Impact. a electrician friend of mine was raving about his over the phone today he lost his bosch and bought this. what has my interest peeked is he says its faster...
I to find that NRP hoses are better than YJ the low loss fittings of the NRP are also smaller in diameter than the YJ.
I would go with the NG hands down I changed over about 10 years ago and will never change a bottle agian. I grill about 5 nights a week rain snow or shine so for me the rotisserie is a must do at...
There is no comparison between the two you have selected the bosch is bay far the better tool. You should also note that you are comparing an impact driver with a non-impact driver.
I have had the 21' gorilla for about a year now. I Love this ladder!!!! for years I draged a 6' and 10' step ladder and a 20' and 40' extention. Now I have the gorrilla and the 2 extentions. 9...
If he spent a 1/2 hour doing 2 1 1/8 joints he dosent have a clue what he is doing. Even with a slightly undersized tip it shouldent take more than a few minuts. I tend to use a TT and have all the...
had a ducane about 15 years ago was a good grill lasted 5 years of heavy use. replaced it with a Broil King and it is still going strong after 10 years of abuse grilling 3-4 times a week year round. ...
My frist line is the bosh I-driver, after that its 18volt dewalt impact driver for almost all work would be perfictly happy with 12 volt impact but I alredy have two chargers with the bosh and...
Last summer went on week’s vacation to the wife’s grandmother in Colorado to do some offloading. While we were there I replaced her boiler & water heater, A/C, shower, toilet, kitchen sink, ran a...
[QUOTE=jeremy-lvhm;1798220]Oh my where do you people get your information from.. LOL its almost comical.
Ryobi has gotten worse while craftsman has gotten better.
Anyway don't listen to trash...
The crapsman power tools you are looking at are Ryobi with black plastic and a sticker that says 19.2 insted of 18 volt.
Good luck
I would like to see the front before I make any final judgements
Saw this at the HD today its got 120inlb for $110
http://www.ridgid.com/assets/thumbnail.asp?path=/ASSETS/FF2EF8E5A9284C38ADB47DF35426E845
compared to the I-driver and the driver it has 100inlb vers 80inlb but it cant come close to the impactors 800inlb nice try though.
Got a husky set about 5 years ago and have had no complaints and no breakage.
I have been doing pitts on a brake for about 6 years never thought about any other way until I saw some auto pitts in box vans on here. still haven't bought one though.
To make the Veto the all time best a living legend even you need
1. tape loop
2. exterior small parts box on end like the ridgid had
3. a selection of pallets it would be simple enough to...
FYI TIF and Robinair are the same company in the end.
I have a vacuum pump and micron gage from Robinair that has served me well for years. By the look of this product it is exactly what i...
well I asked the wife and got the computer duster gas office max brand it is hfc-152a. grabbed the old CPS Leak-seeker and it had no problem picking it up. the next Cracked HX I find I'M going to...
I was told that this is the same thing as your standard office store gas duster. the reacting agent is difluoroethane HFC-152a. I have not tried either to find out if this statement is right.
while Veto may not be the perfect bag its as close as I have found. If you give them a call they will be more than happy to fix your problems
what I Have been told is that as temp goes down there resistence goes up. This is also why they need the chip in them to watch temp when charging if they get to hot the resistence gets to low and...
thats one that it might take less time to figure out whats right with the wiring then whats wrong.:rolleyes:
If I can measure a temp drop across a dryer its getting replaced. it may not be all the problem but i try to only have one metering device per circuit and the dryer ain't it.