Search:

I charged to a clear sight glass my temps are fine now thanks

I am taking my measurements at the coil and the sight glass is half full. It took 2 hours to get from 25 to 15 degrees and it just sits around 15-18 degrees.

Im sorry i just looked at what i said, i meant 25psi and 255-260 psi and superheat 26 degrees

Thats the only leak i found and the txv was wide open and i wasnt reaching my desired box temp but was maintaining my pressures of suction 25 degrees and head 255-265 degrees superheat was 26 degrees.

I found the leak in the stem of the txv once i got the pressures up my box would only get to 15 degrees and it is a 0 degree box. I tried to open the txv a little but it was wide open so i tried to...

Im sorry my suction line from evap is 25*

Hello i am having a problem. I am working on a norlake walk in freezer a copeland 1 phase compressor. It is a zero degree box however my product temp is 25* return temp 34* supply temp 30* ambient...

I didnt take a product temp but the worker said he did and it was 43 degrees before i readjusted the thermostat

Thank you for the information

Phase loss i adjusted the thermostat to 34 degrees and the box temp is now at 39 degrees

Hello jpsmith1cm,
I am a license hvac guy however Im not use to working on coolers and freezers I worked as a hvac tech at busch gardens working on chillers and air conditioning units. I only have a...

Hello I have been in the HVAC industry for a year now I went to a tech school for HVAC and got a diploma and started working at Busch Gardens Williamsburg as a HVAC/R tech the very next day after...

Im having some confusion about my walk in cooler its off by 8 degrees when you set the thermostat. I had it set at 34 degrees and inside the box was 26 degrees and then I set the thermostat to 36 and...