Search:

We have done a couple Staefa (Legacy...not Talon) jobs with Smart Cards and have experienced no Integer problems.

Sounds like something loosened up and is banging against your mobile home's support structure.
Crawl underneath while it's making the noise and see if you can locate it. If it's obviously something...

I have an old Laptop that needs replaced.
I am looking at a Sager with an SSD running Win 7 Ultimate (Win7 or XP) and an HDD for storage.
Question: Can I run my Legacy Software without violating...

Maybe right on the verge of dying...like a flashlight going dim...keeps surging above and beyond the battery pass/fail voltage?

Not trying to be a Smart*ss, but why not change the battery?

Been a while...but I'm back...like a bad penny.

Question: How often do you replace your PM Contract Jace Batteries?

The Manual says every 3 years, but later on says every year if Jace ambient...

Good News, I am not going insane.
As explained to me yesterday by a Support Tech from ComfortSite:

I am a "Customer" who pays for ComfortSite, not a Corporate Client. So I cannot have access to...

Ok, to hopefully prove I am not going (more) insane, attached is a pic of what I see when I open the Tech Support Tab...no software updates and tools.

I just was at the ComfortSite/Tech Support, and there is no Software Updates for Summit SP's.
I also checked Trane Tools and couldn't find it there either.
Any ideas where I may look for the SP10,...

Thanks for the heads up, but no 3D Graphics at this Site.
I have never ran into them.
What's the File Extension on them?

Thanks!!!

And the service pack will encompass all updates since the base v17 so you only need to run the newest release service pack rather than all of the previous ones combined.[/QUOTE]

Thanks for the...

I have a site that has a desktop PC running Summit V17.00.0074, SP 4

The Customer requested I load another Summit Software, V17.00.0046.
I was able to load this version on a Laptop and get it...

And you've got mail.
Sorry for not answering the other requests...been buried doing other things.
Not enough time to visit here regularly, but I'll try.

You've got mail.

The job got handed over to another Tech.
But I'd still love to have anything that will help us with the CCN.
Sorry for the late reply. this will be my record...2 years to reply!
Thanks.

I saw mostly Copelands when I was in Refrig a while ago.
I'd imagine without the Reservoir setup, a lot of valve plates would get eaten up...especially after power outages.
I always thought the...

As I remember, didn't all those old Hill and Hussman racks have the Temprite oil separator, reservoir and also oil floats on each Copeland compressor...and sometimes oil equalizer lines also?
The...

Cool Concept.

I did confine my explanation to comfort cooling as in DX. So I didn't cover Low Temp Apps.
As far as the order of unloading...I was referencing the HGBP as the first active step of unloading. Then...

Wouldn't low head pressure be a concern at low outdoor temps (say just above Economizer Changeover) running all 3 fans with one Compressor?

What replacement motors and blades do you suggest?

All good stuff so far.

Question: Does the rack have a discharge oil separator?
I remember the Temprite Separator screens would get partially
clogged and the oil...

Here's what I have done for years.
First, when you have HGBP, you must have Condenser Fan Control to prevent low Head Pressure. That's because some of your Discharge gas is going to the Evaporator...

Good idea.
I was thinking, depending on how the Header/Suction Lines are piped...that he could come out of the bottom of the Header and run the 1/4" line up to just above the top of the Header, then...

Better to find out now than when it's -20*F.