Sry didnt give 3rd update but I found out that first charge was done in wrong port. Having to much refrigerant on one side. The tech did not read the manual or look at unit. There is a port that says...
Type: Posts; User: temper13
Sry didnt give 3rd update but I found out that first charge was done in wrong port. Having to much refrigerant on one side. The tech did not read the manual or look at unit. There is a port that says...
Hello again HVAC techs. First of all thank you so much, this site and all of you are awesome.
Want ed give update - we got ice dropping.
Solution or what was done- pulled out 112 lbs, re -...
Hello having trouble getting a Vogt machine up and running. And will put comments of previous techs notes and my own.
Initial issue - loss refrigerant due too condenser water regulator stem broke...
Cleaned up most of the muck which I figured was cause of the cooling problem on coils. I slapped on the gauges and got -10 on low side/ Temp=-38 and 100 on High side/Temp=91. Never seen -10 on low...
Been busy night here at casino didn't get chance to look at this freezer. 1st and 2nd shift says its good they added more defrost time. It's that time of the season monsoon. I live in AZ. It's been...
Sry accumulator, 1 evap coil with 5 or 6 . Have not.checked superheat yet. And working with these guys I been wondering why they havent either.
R-404a, walkin takes 58lbs or refrigerant. Not reaching set temp of zero to 15. Suction line, reiever, and bottom of compressor motor getting frosted up. Evap fan are running and coils do get frosted...
Standup R-12 freezer. Not cooling stays at 30 degrees instead of 0 -15. Compressor cuts out after while. I get amp draw of 12.2 at start up 8.9 then drops to about 6.6 for about minute then...
Im here in AZ, dont or cant say name of casino. Just could use some advise/help to better improve my skills
Hello, I worked 3 months residential and now I currently working graveyard at a casino. I mainly.vacuum vents and get chance to trouble shoot and fix things,but I have hard time figuring out some of...