Search:

This is the only rep in the US:


http://www.avahvacproducts.com/Home_Page.html

Contact them and they will be happy to help you.

We are a piping company first and foremost. We do plumbing, pipefitting, and sprinkler.
Margins on these jobs are anywhere from 0%-20% - on average we get around 10% GROSS on construction work. We...

First off this is a great thread.

I agree with what you are saying about the business side of this industry. I was a tech for over 20 yrs, very competant in the commercial - industrial side of...

BIM is the future of construction. We have done several jobs with it. Now building owners are demanding that BIM be part of the design process.
The next shoe to drop in the commercial construction...

Please don't take offense here......You must be joking right? Let me ask you a question. What did you do to repair the leak? Did you have recover the remaining 123?
Call a qualified chiller service...

Does Maddaloni still walk among us? I figured someone would have off'd him long ago?

The controller will still operate, it just won't count the cycles. The only solution...replace the chasis.

We have had good success with putting a piece of 3/8" copper in the bottom of the pan.

A length of about a foot usually works pretty well.

Who did he get rid of after 28 yrs.?

Try Entech sales and service in Texas.

Why is that?

I have done this a few times. Lost a tube on a Trane CVHE and piped a shell in parallel on the liquid line.

This is not unusual..IMHO!!

Nice systems we have installed several of them!!

If you are getting into commercial installs ..be careful, like it was mentioned earlier it is not a game for nice people. It is cut throat!! Low margin work, if it is a plan and spec job..then you...

Are you bidding public work? Why were you turned down? Are you a new company? Less than 5yrs old?

Eagle is ancient history.
Sign up for Comfortsite!!

Just got back an oil analysis on a CVHF 1470 that has a high copper reading.

Anyone know what causes this? I have never seen this before. Also how do we rectify this problem.
The machine has less...

One of our service techs did attend that seminar. It was put on by RSES. You might try to contact them.

I the the committee revokes your right to post here!

Un-believable!

I agree!! What are going to do when the new purge goes into alarm for exceeding max pump-out in a 24hr period?

Sounds you are in a little over your head. Is there someone at your shop that can...

What is a "Fair Dinkum?"

AMEN!! This stuff is killer!!

Make sure you have some guide pins handy. Also clean out the threads as mentioned previously. Those flanges cant be clean enough. Wire wheel the groove if it has 515 in it. Then use a hook and loop...

You must be new to management. You are doing yourself and your company a massive dis-service.
You came onto this site advertising for your company. Looking to hire service techs? I would not work...

So do you miss the office? LOL!