Search:

I don't want to sound arguementative, but, my next door neighbor has the same size tanks on his propane furnace and his does have a gauge. How would the fuel delivery guy know how much he is putting...

I am sorry...It wasn't a spiral. It was an "M" shaped with a rectangular, porcelian base, on the original service call.

It had a spiral ignitor in it when i went out on the origional service call. That one was a replacement at some time before me. It had the connector wire-nutted. When I tried to replace it with one...

Thank you. Went back out since it is local after doing some thinking and looked on top of the propane tanks for a gauge....Wht did I find? NO GAUGE to tell me how much fuel is left in the tanks!!! ...

I just went to a class on the Goodman/Amana brand...You DON'T have to use the comfortnet stat BUT it means running more wires (and possibly more headaches) if you do it this way...With the comfortnet...

Was out on a call today..No heat. Miller propane mobile home unit. Got there, it was a bit chilly inside. Has a hot surface ignitor on the burner. The draft inducer was running but no heat. I open...

Gee...Tell us how you really feel. lol.

I don't know much about hernia's but I do know having hardware in your leg can ache like h3LL sometimes.....Espicially when its going to rain....

All I have to say is....Oh...man oh man....Huffing freon...One has to wonder if it was r-22 or 410a? Probably blow their lungs up with 410a.

Oh...Federal Pacific is the type of circuit breaker...I though you meant the federal pacific breaker for the power grid and being sarcastic.....BRAIN FART!!!!!!

When doing a pm on a furnace with a HSI what I usually do to check the ignitor is look at it to see if it maybe has any white spots in it or looks like it won't make it through the whole winter then...

Just had one today. A Duomatic Olsen condensating nat gas furnace...Looked like a tech before me had cut the sheet tin on the furnace itself up near the plenum, looking for a bad hx, then plated it. ...

Thank you for clarifying that as to where to post. It was a question on my mind as to where to post it. I will get the hang of "forum chatting".

Thats what you call customized!!!

Cool...I don't do a lot of Trane furnaces, but, the theroy is about all the same on them. Thank You again.



Humans are the only creature on the planet that can blush...Or has a reason to.
...

I was working on a Trane natural gas high efficiency furnace today and when I tested the hot surface ignitor for resistance it had only 16 ohms across it. I did unplug it (isolated it) for the rest...

Oh my!!! I wouldn't want that...Or would I? HAHA..

Last year I fell 6 feet straight down, broke my left fibula and ankle. I now have 3 surgical screws that are about 2 inches long each in my ankle and a plate on my fibula with 6 small screws in it. I...

I am taking a stab in the dark...I might even sound like a fool for saying this...BUT, if the problem is NOT that obvious "bulged-out" part on the high pressure side, my guess is that on the high...

I believe my certification is from Ferris State University...Got it nearly a decade ago. Universal here. No warm up exams needed that I know of...

Hello. My name is Matt. I have worked in the field for about 4.5 years. I am new to this forum stuff but I will try to obey the rules and all. Wishing everyone Happy Thanksgiving!!!

Thats customized.