Have an FX80 connected to about 15 Lon controllers. Inputs pull in and data shows fine. The HW Outputs, such as NVIFP01 will add but the values never change. They remain at 0 even though I know they...
Type: Posts; User: mtnwrench
Have an FX80 connected to about 15 Lon controllers. Inputs pull in and data shows fine. The HW Outputs, such as NVIFP01 will add but the values never change. They remain at 0 even though I know they...
I’ll give Linear a try. Precision doesn’t work, that just makes it read 1539.0
Pulling some Lon points into a Jace and the inputs are showing up like 1539 and 687. How do I change these to add the decimal? Should be 153.9 and 68.7.
I've seen this done before but my memory is...
Inherited a house running these older controllers. They have plenty of spare controllers but Im looking for software to upload current programs and be able to download to replacement controllers if...
Have a new 80 that when you discover and add a numeric point, change it to writable, the point will work and display for about 15 seconds. After that, she changes orange and says fault, Write Access...
Yep, static ip to all.
I will double check subnet.
Version 5.2
Through a server.
NxE Information and Connection Tool
What would cause a NAE to show offline unless you start the NCT tool and connect. All works good while NCT is running. When you disconnect or close down NCT, offline she goes.
Had to do the same to a small NAE and the download goes through ok yet again its offline as well. I can ping this sucker and upload or download with SCT with no problems as long as i go through the...
Finally caught it doing this by shelling into it. Exactly as you stated. Rebooted with network cable out until run light was green. Plugged cable in and life was good.
Thank You
I will add to the bonkers.... I will do a discover on a jace on the same network and the NCE will show up twice. Im lost...
DHCP is disabled in the NCE and it has a static IP. When the bonkers start, DHCP changes on its own
to true and IP goes 0.0.0.0
Another company wanted me to change the device id of a NCE (5.2). No problem. Change it in SCT and download. Download goes through but the device shows offline. Tried everything to get back into this...
That whole refresh archive button works miracles
Had some spaces to remove on SCT, downloaded equipment and spaces. Downloaded ADS. UI online matches SCT but when working off line it is still showing the old spaces. How to sync these two?
We are pulling in several JCI NCE's into a Jace. Several of the existing NCE had the same device id. Went in through SCT and changed the device id. Downloaded the individual NCE through the load...
Trying to set time on timer portion of the relay from a button. Would like to be able to set minutes. When I use a numeric constant and link, it always goes to seconds.
Is it possible to set just...
Anyone have one they would be willing to share?
problem solved and understandable. Thanks Doug
Still not a call back to me. Oh well..... Its the plug end. Guess I will be doing a little soldering.
Two month old clamp had the wires snap off right at the connector. Anyone have the link to the repairs on the clamp sensors as Digicool refuses to answer the damn phone?
I love fixing two month...
Berg... what drugs are you smoking?
Never once paid a yearly fee to keep my FX's running.
My FX's can somehow manage to keep time all year long. Please show me a NAE that can do that.
I have...
Going to give digicool a try. Get the 1600 or wait for the AK?
I use one made by REFCO. Great little tool on dead systems.
Thanks Jay, that is what I was guessing and need to check.
-5 Degrees F.
This isnt an oil flow code... it is a low differential. Code 1AE. Its a refrigerant code, not an oil code.
Unit is on an ice rink running 17 degree F glycol.
Unit has factory...
We have a RTAA 300 that gives us the low differential code whenever the outside air gets down to about -5 or colder. Circuit has plenty of charge, running 15 degrees subcooling. Fans are not sticking...
Sure... I can send you a copy. Wont work, you will never get it licensed. Its licensed to the CD code and mine is already used. Need to get your own version from Trane.
deleted
G5... Not even a contest.
Well.... I tried a day of the old way and it sucks. Got used to the Testo doing my SH and SC so a new 550 is now on the way.
Cost of business?
My tool bag bit the big one as well so... more...
Have a two year old 523 that the pipe clamp (temp probe) ate the big one today and no longer works. Gee, I love my options... buy a new temp probe for 259.00 or a new 550 meter for 279.00.
Bite me,...
Need Win 7 Pro-
Run virtual XP machine for HVAC Pro
NAE's run fine on Win 7 with IE 8 provided you play the Java Wheel Game.
FX20,60 seem to hate IE8, get Firefox.
You can load Mtools directly...
Undercontrol,
I got you but these are make up air handlers that feed fan coil boxes. The make up airs didnt come with freeze stats installed for unit heat failure so they are using the logic to...
This thing isnt running on real low ambient temps. Starts at 50 degrees. The problem stays with circuit 2. Circuit one will start up and run normal.
On the first start of the day, the compressor...
RTAA080, installed in 2000. No inverters on the fans,just staged.
Problem stays with the same circuit, never on the other circuit. Makes me think not flow but will check superheats, subcools and...
This problem started near the end of last fall but would never duplicate while there. On a cold start, I can get it to happen this spring.
Circuit starts, runs normally for a few minutes and will...
Changed programming this morning. Works as it should now. Thanks jci guy.
Give that a try in the morning, thanks.
Where?
We have a "x<y" block, going to a "and" block, going to a "timer" block ending up in a "latch". Out of the latch is connected to the shutdown command. Where do I change anything to...
I inherited an NAE with some logic built onto the NAE for a couple of air handlers. The logic sends a true command to the shutdown of the air handlers if the DA-TE is too low. After the temps rise...
+1
With Lonspec they are simple. Without.... good luck. Just dont think they are like the 7300 where you can enter configuration mode with the press of a few buttons. The problems we had were...
JAVA, JAVA, JAVA is correct, I get into all my NAE's and NCE's with no trouble. Not so much luck on FX20's. They seem to dislike IE8.
Have to disagree with you here. I think these things suck when compared to T7300. The only configuration changes you can make without Lonspec or a PDA is deg F/C and local or remote sensor. They come...
Just did a job with about a dozen of them. You will need Lonspec or Honeywell PDA to make configuration changes if necessary. Not too bad but nothing special.
Worked great. Thanks to all those that sent me ways to do it.
I was stuck in a vicious circle of trying to reset the latch trigger using the output of another latch, the same way I would do it on...
Anyone have an example they could screenshot or email me on lead/lag pumps in TGP. Getting my butt kicked trying to reset the latch trigger (error, circular loop).
Figured this out for those who might ever need it....
You have to bring the AI in as an AO, and map to AI. Options tab can only over ride an AO. What a pita... give me an AX over this anyday.
When I right click, I get- view, command and extensions.
When you drag a point onto the right panel, you see the heading at the top of the point such as hardware, trend, etc...
Looking to add...
How do I add an Options Tab to a point that is being controlled by a global data share?