Type: Posts; User: qtip
Looks like S4 it is. :whistle:
Being the OP is not a regular and I am not the one bidding the job to him I really do not want to elaboate much that would be up to the office he is working with. But it is a seamless job and works...
There is an great solution to bring in all the JCI stuff to SC.
Not a problem. Creates a big headache replace boards.
This can be done with some relay magic and a setpoint controller for the 3-way valve, or can very easily be done with a fully programmable DDC controller. The only issue with the DDC is that YOU will...
Its been years since i ran into that problem but if you are writing to certian points on the controller you will kill it. Write setpoints only.
I have been doing this for years. It allows for a controlled shutdown of DDC controlled equipment instead of dropping power on the equipment. I use a three position switch for Stop/Auto/Reset. Stop...
Don't think a Jace would be an "Off the shelf" controller for someone who does not do controls for a living.
Sounds to me like an equipment issue not a controls issue. If your not making airflow there is not enough fan to produce it or the drive is set up wrong. .85 is pretty low static, Air Balance report?
Which version is the SC?
HUI or Configuration access?
Clear the cache in your web browser and try Google Chrome.
if you have an auth code shold not be an issue
No problem with TU. Many problems with Tridium and the patches do not work either.
I can't stand Summit but your question is to vauge to answer.
Replace the valve stem spring and packing...known issue
That explains it!
BTMX or BTMW?
Wait till your 46! :cheers:
:cheers: Well put.. Do I get the chocolates
Global warming?!? Kind of skeptical in my opinion. This planet has been around for an amount of time we cannot comprehend. The Siberian Traps erupted for a million years and produced more global...