Type: Posts; User: bungalows
I know this is not a fresh post but drop me a line, maybe we can help each other
Does it have a replacable power head?
Anyone have docs on the dip switch setting and the light codes?
I have an older sytem II ncrs 1992 ver running in rom. I can connect with the default "staefa" password but when I try to do a code download I get a error that says my password is not on the list...
Good luck and Happy Holidays
Sounds like an "E"-T87F
Sorry just could not help myself
You need the hand tool or a copy of pc-tool which is much better to run on a lap top. Pm me
A simple way would be to create a custom ana block and call it hallway setpoint, point it to occupid setpoint on all four VA2's the units will shut down as there sensors meet setpoint.
Hope all have had a happy thanksgiving.
I just got my hands on an old Steafa System One field controller, but my disks, circa 1988, are no longer any good, does anybody know where I can get a copy...
Are you anywhere near Gainesville?
with pc tool you can tunnel thru the feild controller if you know the address of the card in question
Your willingness to help is greatly appreciated.
could not really get to someone that knew what was going on. I am at your mercy.
Recovery Unit 1,
I wish you well, I am looking for the same as well as the pinout for system II field controller. I have called a couple of the repair shops that advertise stafea but no luck so far....
54 68 61 74 20 77 61 73 20 70 72 65 74 74 79 20 63 6f 6f 6c 2c 0d 0a 4d 65 72 72 79 20 43 68 72 69 73 74 6d 61 73
did you find your hand tool? I have one I can let go, I need a system II installation manual, lost mine a few years ago and need it again.
the frustrating thing is I made a lot of these back then. It just goes to prove that you do not need anything until you throw it out.
I did alot of system I and II in the early 90's, but I have been out of the biz for a while. I just recently got my hands on a system II field controller, I like to tinker, while I still have the...