Search:

I was blamed for a huge messy dump someone took in the house! I don't use clients restrooms as a rule and to my own discomfort at times, I never go #2 anywhere but home (just an odd quirk, I know).
...

I used the code this week and it worked for me just fine. I highly advise everyone to shop there. The service was great and they shipping was very very fast!

I totally agree with Bluebird on this one. It could be any of the control wiring in the heat pump that has rubbed thru the insulation. Your best bet is to go there and cut all the zip tys on the...

I always have good luck wearing whatever Uncle Sam issues the troops. Take a trip to the nearest Army/ Navy store.

Is that the paninni grill being used by the new Panera stores?

I'm getting real good @ stripping the panels off, carting the unit out back and blowing all the crud out of it with CO2. Unit filled with dirt/ debris causes alot of the over temp mag errors....

I called a few of my buddies that still do HVAC and they are soooo slow right now. I don't miss that crap at all. Here I get 40+ every week. There are things that could be improved here but it's no...

My last company vehicle I had, had the ladder rack inside the cargo area on the roof. And we had an aluminum LG to strap up in there. It didnt work too well. The ladder rack (I cant remember the...

Wow!! I am coming from Delaware every morning (About an hour in the morning to the office...err...shed! LOL). PM me your phone number and I WILL call you.

Wow!! I must be the guy who hired in after you left in Columbus. I gotta say....you about said everything EXACTLY how I feel. I started in September 2010. I have experienced some great training (From...

i have it. it works good. i like the ability to power on the uv lamp and a laser pointer at the same time. i used it to show a HO exactly where the leak/ leaks were. and like was said.....it's cheap.

dont get me wrong fellas, i LOVE my ridgids and would NEVER ever buy anything else. i was just surprised that aluminum was cheaper than the steel wrenches!

i have a set of steel pipe wrenches (10-24") that i have had 10+ years. i always wanted the same set just in aluminum. i was told the jaws opened just as wide and the handles were just as strong as...

my g5 is great. the on/ off switch went bad last summer. dam thing wouldnt turn on. i opened it up and bypassed the switch. i called Appion asked if that was a common problem and they sent me another...

[QUOTE=heaterman;4845992]There were several steps of protection here that all went bad in one way shape or form. No permits were pulled.

Thats a given.

The instructions for the furnace were...

for me i use a large uni bit on almost every call. i need a 1 3/8" hole to insert the head of my inspector camera. uni bit does it perfectly every time.

i had the bosch screwdriver, it was fine for a while. then i got the bosch impact and it blew the screwdriver away. better speed, torque and better lighting. the only thing i hated about the bosch...

just my two cents for what its worth. i have the single port uei manometer and its great. i've had it for going on six years. some folks might tell you all uei is junk, this is the only uei product i...

i wonder, do you think they bothered to check for the coil location before they located that there? maybe they just started cutting metal and got lucky. or did they? i would certainly check behind it...

i just bought the appion g5 twin. i havent used it yet but it is very small and light. i bought it from a guy on craigslist for $500 cash. still in the box brand new. probably stolen, i know. too...

I O :D
i see plumbers, cable guys even the phone company using them. i think it looks like a good idea. spray paint stencil your company name and phone number on them and put them out there.

anyone using parking cones around their trucks/ vans when they park? i saw that most of the local cable tv service trucks set one in the front and one in the rear. it got my attention when i saw it...

i used staybrite #8 for years and never had a problem. even on 410 stuff. u just have to use special flux, clean the joints and make sure the cut is square. i never used staybrite on a compressor...

i have had the same uei digital sling psychrometer that i bought 6 years ago. it works fine for me. i have compared it to the testo and the amprobe and the readings are all within 2 degrees. fine by...

i have the refillable nitrogen cylinder also. i never really liked it. i know that most techs dont care for it, but i have never had a problem with it.....the wagner gallo gun. its small, easy to use...