Search:

Wow, Ive been through alot in the last few days, Ok I got past the win 7/64 home version and the lon stick, everything was fine until I attached a ecsmartvue to the subnet of the ecl610, now my lon...

where do I confirm that AX is set to look at port 1, the adapter is plugged in to port one. Also do I need to load a distech driver for adapter or is the echelon driver sufficient?

Ok, received adapter installed driver etc and confirmed, created a station with a bcplonetwork, added wizards in to config/services Now how do I make it recognize lon adapter. ECL600 powered and...

Thank you, I will have the lon adapter quick shipped to me tomorrow and keep you posted. Unfortunately on this project we put the cart with no wheels before the horse with no legs, so Im learning on...

Ok, So with a LON adapter and driver on laptop with AX direct to ECL610 I can program without the need for a JACE or EC BOS?

Well, thats the problem Im having, Not sure what to connect with, stereo/mono to USB, LON bus or what. Or Do I have to have the EC-BOS.

2nd question will the controller run stand alone after...

New to Distech, I have EC net AX pro running on laptop. Question I have is can I program an ECL610X direct connected to laptop, or do I have to have an EC-bos?

I also want to extend my strong appreciation of the lockhart team, not only is it the best digital gauges (AK900) I have purchased, but the most accurate, which is extremely important. Im only as...

Yep, use the reheat coil when humidity gets above determined hum setpoint, and have the DDC loop use the same reset setpoint as your cooling coil is simultaneously until humidity drops then can the...

What specifically are we trying to control or are you needing fundamental control of various systems. It also depends on the type of cooling medium IE Amonia, Refrigerant, CO2 and etc... What system...

Yes, I do beleive that was the name of the pipe, couldnt remember the name, Is it flexible like pex, He called it george pex. I'll find out for sure tommorrow.

On the store employee thing getting...

Well in short my last word of nothingness is you are definately not the norm. To have a management staff that is refer educated is not only rare but slim to none, now dont get me wrong all the stores...

Not getting in the middle of things but I do have a legit question. Im always interested in analytical stuff, How about product loss %. has it went up or down. and profit? Dont need numbers just...

I asked the exact same question and the answer was NO, It was to the cases. Ill Do some more interrigation and post some facts next week.

Yes like plumbing water plastic, pretty good stuff for plumbing, definately dont think it would be good for CO2.

I know of at least 4 supermarkets this summer that will be getting the CO2 systems Im referring to. And I was wrong its 4x4x4. CO2 in pex to cases, dont have alot of details but as I get more info...

We need to pray for the over engineering engineers to do their job, and this will keep us all on our toes(job security). Staying up with the latest technologies and becoming heavily involved with the...

Yes monitored the bar graph, when TXV,s were on target very small incremental changes to plus/neg pressures when it was hunting you could see the bar graph swing pretty far out. Going to troubleshoot...

Finally got mine and set superheat and confirmed ref charge using subcooling on a R-22 air cooled chiller yesterday. And superheat on a R-404a dual temp coffin case today. Super impressed with the...

Sure would be nice to have some pics, have you pulled a oil sample and sent in for testing??????:grin2:

The schedule is just toggling a binary variable which enables the VAV ucm controllers to go in to calibration mode, once enabled the VAV ucm does the rest, therefore no need to keep the scheduled...

Usually on OA temp routines i set the execution time every 30 minutes to eliminate fluctuations. This simplifies the programing. Just a thought!

I agree with Will, that first routine doesn't make sense at all, I would confirm if that routine is even enabled to run! second routine works, but I prefer to use a DDC loop to control staging. Ditto...

Is this a new start-up or existing application, Im sure you have checked the obvious like rotation and all your iso valves are open. What is amp draw at fault versus nameplate etc... need more info,...

Yep mine is stuck in san fran too, girlfriend ordered on the 17th. But I know it will be worth the wait. It will be my first set, Im ready to go play.:grin2: