Search:

Type: Posts; User: Miller257

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. IMC 304.11 Guards - Guards shall be provided...

    IMC 304.11 Guards - Guards shall be provided where appliances, equipment, fans or other components that require service and roof hatch openings are located within 10' of a roof edge or open side of a...
  2. It's minimum code in IMC 2009 I believe.

    It's minimum code in IMC 2009 I believe.
  3. 15' from where it comes in from the roof, 3/4,...

    15' from where it comes in from the roof, 3/4, 250mbh
  4. Equipment has to be 10' from the roof edge or...

    Equipment has to be 10' from the roof edge or have a rail.
  5. I don't even know what to say about this one.

    Besides the wiring, the curb is flashed in on an asphalt roof with rubber. http://hvac-talk.com/vbb/images/smilies/13.gif

    No permit on a permitted job, no firewrap on greaseduct. to close to the...
  6. You might as well point the duct at the wall.

    Had to fix this one, simply put commercial double deflection grills on (with volume dampers). Point them at not such a drastic angle and rebalanced.

    552651
    552661
    552671
    552681
  7. They didn't catch the guys but the contractor...

    They didn't catch the guys but the contractor whose lift it was had to pay for the fence.
  8. Gotta teach the apprentice how to size gas pipe.

    1/2 is a little small for a 10 ton.

    552641
  9. Make sure you pull they keys out of your equipment

    When your working at a school in the hood.

    552611
    552621
    552631
  10. Carpenter roofed the curbs in over the weekend.

    This is what we showed up to this morning.

    552591
    552601


    The white stuff around the curb is aluminum....
  11. Replies
    15
    Views
    2,822

    Nah they banned smokers a few years back, however...

    Nah they banned smokers a few years back, however they do build little heated smoke shacks. The smoke you see it from the dj's smoke machine.
  12. Replies
    15
    Views
    2,822

    There ya go, I couldn't tell if there was a hole...

    There ya go, I couldn't tell if there was a hole behind it.




    That's what I thought at first, but its pointing the wrong way.



    Haha, no my choice of venues, wife's best friends 30th.
  13. Replies
    15
    Views
    2,822

    yea bars and restaurants are the worst. oh and...

    yea bars and restaurants are the worst. oh and that's an outside wall...
  14. Replies
    15
    Views
    2,822

    I am unaware how to. The original file is the...

    I am unaware how to. The original file is the correct way, the forums rotated it when I uploaded it?
  15. Replies
    8
    Views
    2,642

    they wanted more ceiling height I guess. Were...

    they wanted more ceiling height I guess. Were putting the ceiling back in at 11' instead of 8'
  16. Replies
    8
    Views
    2,642

    Landlord was very supprised to find...

    That the tenant had removed the entire ceiling grid and ductwork. Lights and electrical were suspended with wiring.

    550311
  17. Replies
    15
    Views
    2,822

    You're doing it wrong....

    Saw this at a bar Saturday night.

    550301
  18. bump

    bump
  19. bump

    bump
  20. bump

    bump
  21. Replies
    9
    Views
    2,641

    Fusible link on a fire damper, gotta love when...

    Fusible link on a fire damper, gotta love when they don't put in access doors...
  22. Replies
    11
    Views
    3,121

    and the removal procedure 530791

    and the removal procedure

    530791
  23. Replies
    9
    Views
    2,641

    Job dedication

    Not sure what he was even fixing, but one of my service techs goes above and beyond.

    530781
  24. Replies
    11
    Views
    3,121

    Free screwdriver with every new fan.

    526541

    526551

    526561

    526571

    526581
  25. Thread: Exhaust Fail

    by Miller257
    Replies
    6
    Views
    1,308

    Exhaust Fail

    Got called in as an engineer to write a letter as to why this is wrong. hazardous exhaust in pvc, each tube is about 300-500 cfm. no MUA.

    524271

    And I'm not going to even get started on the...
  26. Replies
    5
    Views
    1,822

    Luckily the damage was minimal. It was over the...

    Luckily the damage was minimal. It was over the kitchen and cooler

    This guys was something else, he roughed the whole job off the bid-set of plans. Had to rewire the refrigeration equipment 4...
  27. Replies
    5
    Views
    1,822

    Why was it raining in my new restaurant???

    This is how I spent my morning. Silly electrician couldn't figure out the waterproof fittings supplied with the unit.

    520371

    520381

    520391
  28. Thread: Traps?

    by Miller257
    Replies
    10
    Views
    2,036

    I believe it fell off and the maintenance guy put...

    I believe it fell off and the maintenance guy put it back on like that, then we got a call about water leaking.
  29. Replies
    12
    Views
    2,081

    I would classify this as a "skinny guy job", and...

    I would classify this as a "skinny guy job", and then my boss would respond "there aren't to many fat guy jobs."
  30. Customer was complaining of low humidity in OR4

    My customer always had low humidity in OR 4, all the operating rooms were on the same unit with the same humidifier. Took this picture after letting the thermostats sit for an hour while i was doing...
  31. Replies
    12
    Views
    2,081

    What happened to all my air

    Found this one while balancing. Luckily I had the skinny guy with me.


    519091

    519101

    Installer neglected to fully convert the down flow unit to a horizontal. luckily he threw away the blank...
  32. Thread: Traps?

    by Miller257
    Replies
    10
    Views
    2,036

    Traps?

    Still can't figure out traps...

    519071

    519081
  33. Thread: Wirenuts

    by Miller257
    Replies
    1
    Views
    1,192

    Wirenuts

    One of my former techs mounted this carryover tube on a York RTU with a wire nut.

    519051

    519061

    I'm glad my current tech found it on a PM and had enough sense to "quietly" repair it.
  34. Entry Level employee needed in Milwaukee, WI

    Looking for a motivated individual interested in a career in HVAC. This position includes on the job training as well as required schooling in the HVAC industry. Please e-mail your resume.

    Skills:...
  35. HVAC Service Technician needed in Milwaukee, WI

    Teko Mechanical, Inc. Founded in 1997, Teko Mechanical Inc. has become a cornerstone in Southeastern Wisconsin's HVACR industry. Teko offers quality service with custom commercial, industrial and...
  36. HVAC Installer/Sheetmetal worker needed in Milwaukee, WI

    Teko Mechanical, Inc. Founded in 1997, Teko Mechanical Inc. has become a cornerstone in Southeastern Wisconsin's HVACR industry. Teko offers quality service with custom commercial, industrial and...
  37. Replies
    10
    Views
    3,111

    Wow, never realized great stuff was UL181 listed!...

    Wow, never realized great stuff was UL181 listed! :gah:
  38. Thread: New Boots

    by Miller257
    Replies
    15
    Views
    2,679

    Power was off, and how would it be any different...

    Power was off, and how would it be any different than a linesman in plastic bucket on a boom truck working on a live wire. I guess we could have let the building freeze...
  39. Thread: New Boots

    by Miller257
    Replies
    15
    Views
    2,679

    why would using buckets to prevent your feet from...

    why would using buckets to prevent your feet from getting wet get you a darwin award?
  40. Weld on a 1/4" coupling, thread on a ball valve,...

    Weld on a 1/4" coupling, thread on a ball valve, drill it out and shut the valve. then thread on a service port.
  41. Thread: New Boots

    by Miller257
    Replies
    15
    Views
    2,679

    Plumbing burst on the second floor, ran all the...

    Plumbing burst on the second floor, ran all the way down to the basement, where the floor drain was plugged. I think the wire is for a pump, as they pumped the water out instead of unclogging the...
  42. Replies
    4
    Views
    1,358

    I have the uniqure oppertunity of being a...

    I have the uniqure oppertunity of being a estimator project manager and engineer, I do the same, medium or high static drives. Upsize the drive on furnaces. the best thing in the world is the DC...
  43. Thread: New Boots

    by Miller257
    Replies
    15
    Views
    2,679

    New Boots

    My boss

    450161

    After all they they didn't get the floor drain unplugged! :Faint:
  44. Replies
    4
    Views
    1,358

    No, they installed the HVAC and we installed the...

    No, they installed the HVAC and we installed the kitchen hood.
  45. Replies
    4
    Views
    1,358

    It does not actually matter.

    Contractor to inspector;

    "I understand that the balancing report and results of air flow are nothing like the plans we submitted and that were approved through your office but it is my...
  46. Replies
    65
    Views
    6,461

    It's a quick easy way to cover your ass, If you...

    It's a quick easy way to cover your ass, If you do a PM, compressor runs fine, pressure and amps. Do a meg and megs kind of low, you can note it on your report.

    Nothing worse than doing a PM, and...
  47. Replies
    24
    Views
    3,873

    Inspector wanted it every marked every 5 feet. I...

    Inspector wanted it every marked every 5 feet. I went a little nuts...
  48. Replies
    65
    Views
    6,461

    It depends, typically 1.25 hours in spring, .75...

    It depends, typically 1.25 hours in spring, .75 hours in fall 25 tons and under.

    Spring;
    Clean coils
    check amp draws, meg out compressors
    check amp draws and meg out blower motors
    check all...
  49. Replies
    76
    Views
    4,870

    wow some of you guys throw a lot of hours on...

    wow some of you guys throw a lot of hours on there, cranes to get them on the roof. 24 hours???
  50. Replies
    12
    Views
    2,144

    I was agreeing with Marc, I tell all my guys to...

    I was agreeing with Marc, I tell all my guys to do it that way, not as pictured.
Results 1 to 50 of 271
Page 1 of 6 1 2 3 4

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event