Type: Posts; User: Nrmika
I was weighing in but it set off the freezestat. Feathering to fast?
any good tips on how to charge a RTU during winter? tried yesterday and set off the freeze stat...
I seem to remember from school that when the compressor in a system burns out you have to use filters on it to make sure you get all the oil out of the system. I just can't remember what type of...
Suction yes, plenum no
I got a call on sunday about a recent install several hours out of town. The system is condensing on the outside of the plenum and on the lowside of the lineset so much that it is pooling on the...
does lennox's approach method result in the same charge as subcooling? and which is the better method to charge by?
They must have over torqued it? I tried that but the copper is just tearing apart
Suction side of evap for the expansion valve equalizer line
Anyone got some tips on how to remove a copper flare seal bonnet? I need help asap lol
yes the adjustment brought it down but not to zero I will be ordering a replacement gauge on monday :(
Not Ozone depleting but global warming potential
Not my hoses. The gauge won't zero on the high side
Lol so which is it 3 or 5?
What is the distance required between a gas meter and condenser in Canada? I know you can't terminate vents within 3 feet around and 15 feet above...
Thanks for the ideas guys
So you release that refrigerant to atmosphere?
How do you guys get rid of the refrigerant in your gauges after charging? 410 is high pressure so if you left it in it could wreck them. Or that's what I think pooched my high side gauge. It won't...
410... How much do you use as trace? And then do you just release it and the nitrogen to atmosphere?
Ahh never thought of that. I change my oil every time I us the pump
Yeah that I know lol. Thanks for the ideas. :ow hard is it to fond if its in a coil? Seems like it would be hard to find?
Of course lol what kind of pressure do you put it under? To low and you might not find it and to high might not form bubbles...
What do you guys think is the best way to find a small leak? I am having trouble finding a leak in someones split system. I can only get a vacuum of 1200 microns and its hard to get there so I am...
Chris did but I will drop you a line if I have more questions
You bet ben