Search:

The best part is being smart enough to know you made the mistake.

So glad I am not the only one felling the pain. If it wasnt for the other good people in my office (all from York) I dont think anybody would still be there. As for as the inventory thing I show...

This nxgen is a f#%*ing joke. This will be the last straw in the downward spiral of a ounce great company YORK. the servers are down and we cant send in our time so if you are off on friday and are...

alcohol?

If your shop collects more then a set amount in one year, I believe 1000gallons you become a hazard waste maker and its a whole new ball game $$, so let the customer take. The same company that takes...

I cant write it any better then above, it just makes my stomach turn thinking about it, coming to work with the factory was great they wanted you to fix chillers, now they dont give a s*#t, as far as...

SEI,
I have no water treatment experience here just chiller mech, but i have common sense, in an earlier post you said tube inspections every month, that it self is not a good study because you are...

I dont know much about water treatment but i do know that dolphin does blow nalco away----by the amount of water that is blown down the drain HAHA!!!!

If we have to follow these rules we cant stay compettitive with our pricing, as long as other shops dont have the same policies, I understand saftey but you do have to draw a line some where, after...

Fellow chiller techs I have a question. How are you guys getting away with doing annuals on YK and YT chillers and sticking to jci policy? The reason i ask is because it is imposable to complete the...

Please tell me how slowing down your gpm is going to reduce your supply air temp? I say it will go up, less gpm = less tonnage = higher discharge air temp. no way around it TONNAGE= GPMxdelta T...

not a good idea unless you pull charge could exceed pressure ratting of coil, if unit not to big I would remove coil.

GT I agree the type of grease is most important, but there seems to be a lot less gray area with grease choice thats why I didn't include,
Flange yes for air handlers I see shut down for saftey, I...

I will start, I lube motor, running or not dont care, annually with aprox 7-10 pumps, no failures due to lack of lube in 10 years, KNOCK ON WOOD, what say you?

I didn't search this site, but I want to see how many different answers this brings up, this is based on large motors 100+ HP, greasing frequiences? How much grease? Grease with motor running or...

water regulation is the only way to raise head pressure, if the unit that stay runnning on cool day all have close to same load you can put speed drive on condenser water pump, that would be less...

c-jac486 thanks that's what i needed that is the filter that i have and thanks for the part number for both

19XR365144 does anyone have the part number for the oil filter gasket for this chiller i have filter but cant find gasket

Your biggest concern is going to be oil return, I am a little partial but york is going to be the best for low water temp on condensor side of centrifugal Chiller, you can get around 10-12 degress...

That grill one is good. I almost had my milk come up through my nose.

chilled water flow fixed or variable? condenser water temp? leaving water temp? Then we can start to help.

the msds and the bottle say not to heat with open flame. The sign says speed limit 55 MPH how many of you stayed under 55. I use open flame but I make sure the bottle is open, and make sure I can...

hi,
I am a chiller mech and not a refrigeration guy so I need a little help, I have a system that is single compressor and two coolers and one freezer, epr's on cooler set for 22# (r134) and...

ditto that above, and does it have hot gas or economizer's????

have factory start up chiller otherwise no warranty and we Know how to start and check