Search:

Sounds good. Never tried it. I'm a sweet baby rays fan when in a pinch.

I would check your hot gas temp at your cases and hot gas diff valve. If you dont have flow or proper diff you can fill the coil with liquid. If you have coffin cases check for ice. Do you have...

http://www.emersonclimate.com:8765/ctppub/query.html?col=ctppub&qt=reflecs
Im sure u have probally checked cpc website but the are some upgrades available. See if customer will go for and E2;) now...

Not changing them in the feild, they are being used on new installs and all new equipment being ordered

In my area we have switched to the A4a valve ( its huge) but so far more reliable. It also has very little pressure drop across it when full open where as ive seen as much as 5psi on a A2BL when full...

wow nice install. You do not even have to bend over to put your gauges on, wish they all could be this way:eek:

That rachet cutter can get u out of a jam. ME LIKE:D

This should be a great cup. But I must say GO PENS !!!!!!!!!!!!!:D:D:D:D:D

I would agree with JP. If all that checked out, I would check for clogged sentronic screen while checking pick up screen, systems blowing back during hot gas defrost, and even switching ofc control...

virtual mode displays on your laptop as if your were standing at pc. The key strokes are the same as if you were at the cpu. As you know ultrasite looks completley different than the actual screens....

I don't use them every day but I have two ridgid cutters that I have had for over 10 years. They out lasted my imperial but it also preformed well for medium use.

Yea, customer wants to wait till friday at midnight to agree to oil change. Also the inhouse maint does not check sump screens because " oil float is full " usually find them sucked closed and...

Have any white rubber roofs. target stores in my area use them. The reflective light is blinding.:eek:

Low temp 22 with demand cooling. I have had major problems with the white teflon seat in the demand cooling valve holding the valve open. It then proceeds to blow out the reeds. If you are not having...

I hate know it alls. We all have our specialties and still have room to learn in our respective day to day encounters. Its such a diverse industry and it supplies the ability to humble us all and...

Were they the new style where the reeds are fixed or the old style where the reeds were removable. On the old style the reeds would wear an oval where they sat on the pins after time they would work...

Where were the condensing units located ( how far from evaps ) regaurdless 70* is high. I would pump down and check txv strainers since the oil looked "cruddy" before I would start adjusting...

Cool stuff!!!!! I have a hard time finding seashells:)

Ribeye is hard to beat, but a porterhouse you get two cuts YUMMMMM

Tried sushi twice. NO MORE guess i dont have that refined taste. Catfish like it though and I will fry one of them up.:eek:

Never seen that before. I have almost all hussmann racks in my area and never have even heard of such a rack. Just doesn't make sense, would like to know what hussmann says. I would try to convince...

Good general purpose meter, use it daily. The hold button is anoying but still a recomended purchase.

Was ask to evaluate a small chain of stores and how the equipment was being maintained. Found this gem in the first store in the first 2min. Needless to say the list was long.

Thought that transformer for the fiberoptic hand held looked familiar. I just switched a store over that had five racks with the old epc's. Had to solder all the circuit branch board jumpers back in...

if they were very negelected I would use some rust preventer before you paint. It usually shows on the receiver and suction service valves. A wire brush also goes a long way.

Always walk in with fluke and 10 in 1. usually wish I would have grabbed my gauges:confused:

I've used them and like them alot. Its the best option for a live system in my opinion. Have had the needle bend up as you described. I do prefer using standard 1/4 or 1/18 access fittings if the...

when the lpc closes the unloader sol. energizes and UNLOADS cyclinder or in your case cyclinders.

Even in large pull downs with large pumps 17cfm.... your vac is only as good as your oil. You will get that milky look to it the initial pull down. change the oil and the closer you get to 500...

Have met way more freinds than enemys in my area. Never know when you may end up working together down the road. Supermarket techs in my area always say tha faces stay the same you just sometimes...

Working with cyrogenics making your own ultra low blends huh :) nah I'll stay away from your cyclinders

corrosion in an evaporator....I would have to say it's more likely to have been caused by a chemical like the acids from salads & veggies than from anything electrolytic or galvanic.



We have...

I agree with Phase Loss, you can check the unit that is cycling and operating and can go from there. That method has worked for me, even with un-marked reclaim cyclinders.

I thought a fan center was a place I could go to purchase hard to get blades ???

Supermarket refrig. in my area is slower than normal and almost all projects have been pulled. Hoping for what I used to dread... the long HOT days of summer. Construction is even slower, we are...

My company supplies all power tools, battery operated tools, any test and measure tools, and any hand tools over 12" in length. We supply only hand tools under 12". They replace at their cost if...

Was thinking maybe with you pulling gas from discharge on compressor, the cond holdback (orit) may have choked off traping gas on outlet to sol valve in cooler. If second sol valve in cooler called...

I have used similar methods as fridge and 750 with no problems. That being said harper makes some valid points. I haven't been snake bit yet but I may change on the next one to see how it goes. These...

Hey Pulse,
Was there an orit\ord valve on the outlet of the condenser. Was there a sol. valve at the cond unit being controlled by the defrost clock and a seperate one in the cooler being controlled...

The balanced ports would be my choice also. I would sand the bulbs, sand the suction lines, and insulate the bulbs to get you thru until the valves come in. Not saying thats the permenant solution...

I have had good success with insulating bulbs on D5 cases that were on a Rack application. I also have had success with the adjustable conversion kits on D5 cases on a single application. Both...

Just a few questions. Are their eq lines off the crank cases or the oil floats, was there any amount of liquid in the cranks before you started back up, and what type of seperator do you have (turbs...

I too prefer hotgas defrost. However load is a concern. You would lose some of your energy savings by having to override a compressor on during defrost and (if your control system permits) floating...