Search:

Type: Posts; User: titan7

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    702

    No I did not turn off the power. I pulled the...

    No I did not turn off the power. I pulled the infinity t-stat off the wall plate, and disconnected each wire and put a wire nut on each one. Yes I marked with wire go to each terminal. This is the...
  2. Replies
    3
    Views
    702

    carrier infinity thermostat short??

    So I disconnect the thermostat to paint, hook up the ABCD wire in the correct slots, and no power up on the display?? The Furnace LED is showing a code 24 error? very strange, not sure why this...
  3. I will take a look at the filter again tonight. ...

    I will take a look at the filter again tonight. I am really puzzled by this, nothing else changed with the system and a 1 year old dirty filter is getting the same ESP as a brand new clean filter. ...
  4. Perhaps I have a different controller? It's a 5...

    Perhaps I have a different controller? It's a 5 yr old infinity controler. I have some buttons on each side and if I flip the panel cover down I have 4 buttons going left to right.

    I am...
  5. The ESP readings are as follows: 1 year old...

    The ESP readings are as follows:

    1 year old filter:
    High Cool:
    1400 CFM
    1141 RPM
    ESP .72

    New Filter:
    High Cool
  6. Hey Dash, long time!! You were a huge help 5...

    Hey Dash, long time!! You were a huge help 5 years ago when my system went in.

    I did not reset the controller, never have? I don't get those replace filter errors coming up. I am 100% sure...
  7. Replaced media filter ESP reading is the same?

    I have a honeywell 20x25x4 media filter tray. I use the Honeywell F100 Merv 10 filters. I replace them about once per year. I replaced it today and the ESP did not drop???

    This is the first...
  8. Replies
    6
    Views
    982

    thanks

    thanks
  9. Replies
    6
    Views
    982

    The Static pressure was about .22-.25. Was not...

    The Static pressure was about .22-.25. Was not doing it tonight.
  10. Replies
    6
    Views
    982

    Carrier infinity furnace question

    I have noticed during the last couple month the furnace is humming a bit louder than usual? Also I noticed the air flow was pulsating a bit. I looked at the advanced menu and the CFM was pulsing...
  11. Replies
    9
    Views
    924

    great info, thanks guys!!

    great info, thanks guys!!
  12. Replies
    9
    Views
    924

    Yes, we have been having 100+ Monsoon weather...

    Yes, we have been having 100+ Monsoon weather here in So. CA. lately. It's been really humid with some rain. Have never seen it so hot and humid since we put the infinity system in 2+ years ago. The...
  13. Replies
    9
    Views
    924

    Any ideas on why a AC would still run when the...

    Any ideas on why a AC would still run when the temp on the t-stat is below what you have it set for? Ever since the power outage a few days ago I have noticed the AC running about 1-2 degree lower...
  14. Replies
    4
    Views
    1,604

    wyounger, Thanks, you are right, it does come on...

    wyounger, Thanks, you are right, it does come on later!! Thanks again, you guys ROCK!
  15. Replies
    4
    Views
    1,604

    Thanks, I will look in manual!

    Thanks, I will look in manual!
  16. Replies
    4
    Views
    1,604

    Basic question on the Infinity Controler. I have...

    Basic question on the Infinity Controler. I have a 38TDB48 ACunit and a CVX9016 Variable speed furnace. It's 10 months old and I just kicked on the AC yesterday. I have the fan speed on Low to have...
  17. Replies
    35
    Views
    4,206

    Thanks Mel!

    Thanks Mel!
  18. Replies
    35
    Views
    4,206

    Thanks to all who helped me!

    Thanks to all who helped me!
  19. Replies
    2
    Views
    881

    Thanks!

    Thanks!
  20. Replies
    2
    Views
    881

    Well after fixing the return I am currently...

    Well after fixing the return I am currently running at the following:


    Current reading with a new honeywell F-100 Merv 10 media filter:

    Low heat ESP is .22-.23 @ 825 CFM
    High heat ESP is...
  21. Replies
    35
    Views
    4,206

    Fixed, well sort of...

    Installer were back today, they ran a new t-stat wire, went well except for the 1"x2" hole in the family room wall while they were drilling.

    As for the Return, They decided that we would first try...
  22. Replies
    35
    Views
    4,206

    Actually you may need to do both,how many six an...

    Actually you may need to do both,how many six an four inch runs do you have?

    Upstairs: = 7 ducts with grills above the doors. Longest run from the 14" to the guest room is 15 feet.

    I have what...
  23. Replies
    35
    Views
    4,206

    Dash, My Honeywell 20x25x5" Fc100 filter has...

    Dash,
    My Honeywell 20x25x5" Fc100 filter has been in place since 6/18/04 when the system was installed. It does have dirt on it but I am not sure if it needs to be replaced?? They told me 1 yr on...
  24. Replies
    35
    Views
    4,206

    There may be room for a small 5-6" duct, which...

    There may be room for a small 5-6" duct, which would terminat toward the living room. in the hallway, that duct would be 12 feet away form the 9". Would adding another return to the same room as...
  25. Replies
    35
    Views
    4,206

    Thanks Dash, those are great suggestions. I...

    Thanks Dash, those are great suggestions.

    I will not be able to drop the ceiling in the Bath as it's only about about 7' high now. it's only 5 wide by 9feet long, toilet and sink, with a exshast...
Results 1 to 25 of 30
Page 1 of 2 1 2
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event