Type: Posts; User: FrostyBeer
Not that this helps now but does Trane possibly have a pipe kit for that?
Yes, definitely keep a set of analogs for backup. You dont have to change batteries in analogs.
They're also good for recovering a burnout, if you have to leave them overnight somewhere, if...
What head pressure do you charge to?
Looks like a sad attempt at swedge joint..(think I spelled that right)
Finally someone mentioned it..the temperature right now is way to cold to properly check a system.
Like Brent said, it needs to be at least 55+ out to use SH and SC
There is a chart for...
All that rust on the front is scary
I started doing service right out of school. Followed a tech for maybe a month and was then thrown in the deep end to sink or swim.
I'm still swimming partly thanks to h-talk and just reading,...
Very nice install btw
Idk any actual numbers but the theory is your only heating the water when you need it. Instead of keeping say 40 gallons hot 24/7.
Comfort also comes into play. You really don't have to worry...
Red wire strippers was my answer
I had an old boss tell me to "just purge a little gas through" after opening up the liquid line to inspect the orifice.
Ok, your losing power to the gas valve. Where are you losing it before the valve?
Does the pilot stay lit?
Make sure igniter is the correct one for the unit
Klein makes "slip joint hose clamp pliers" that I use.
They have notches cut out in the tips so the spring doesn't slip out. They're like 15-20 bucks.
If I'm understanding you correctly and without being there, I'm going to say no the flue pipe should not extend past the "stub out" and into the plenum.
The flue pipe should be on the stub about...
furnace brand, model and serial if you have it?
As Pac said we need better pics of what your talking about here.
Also flue piping usually never runs through any plenums...unless specified by the manf..and those have special enclosures and what...
Already tried that. Nothings grounded.
Just what I was looking for. Thank-you!
I'm looking for a 25amp "resettable fuse" just like the lil poppers but rated for 25 amps.
Had anyone made one from like a breaker or something?
Do they sell such a thing?
Im trying to track...
Yes, you need it in order to set your draft.
#1 always check for unburnt oil. If there is try and burn it off with a lit piece of paper or something.
What type of universal pressure switches do you guys carry?
The interchangeable spring ones or the one with the adjustable allen screw on the back?
Pressure switch tubing!!!!
Didn't have any on the truck a few weeks ago and no supply houses near by had any! And half of them didn't know what I was talking about.
Finally found some after...
Try finding one of us near you with our Contractor Locating Map: