Type: Posts; User: GastecD
It's up and running! Made some adjustment on incoming water
Its a new unit, and you would be right to assume it is a water cooled condenser- by municipal water, Incoming water temperature is 42 degrees. Outlet is no more than 50.
I'm not adjusting the high...
the high pressure cut off set point is 400 psi, the unit is controlled by a pressure differential switch
And so it was
I dont do very much refrigeration, A friend of mine asked me to install a walk in box for his cottage to hang game in
We put the box up and Installed all the equipment as per the engineers sizing...
No heat call for a Keeprite furnace
Call for heat
pressure switch proven
pilot gas ignited
pilot valve remains on- no main burner
No heat call, found the filter was plugged solid and coil.
With the blower door off Im bypassing the coil and the unit works.
I would assume that with the door on and the unit calling for heat...
Have you tried removing one that was siezed?
I can't believe this... A condo full of these? I think a license should be revoked
Agree with changing the furnace, once you have to change out a spark plug youll be wishing you had
This could come in handy, thanks.
Also did some researching, thinking an instant hot water heater with a recirc pump on it, may do the trick. Looks like the gpm they require will match up with...
The sewer smell is throwing me off, is it possible something is on the heat strip thats burning, is the duct lined with anything? ie acoustic insulation?
That is strange, make sure to share the outcome. Never know when youll come across something like this
A commercial bakery I do some work for asked me if there was a way to get 86 degree water for dough mixing.
They would require approx 40 L of water every 10 minutes for each mix.
The economizer are off and fresh air dampers set for 25% fresh air as per building code. Supply air temp was 68 on start up, 73 after running for a few minutes.
The unit is horizontal discharged,...
We do the same, its a liability - being the last licensed technician to service the appliance it becomes our responsibility to ensure its running safely.
Got a call with complaints of cold air coming out of the supply runs during the start of the heat call making patrons uncomfortable.
Looking to adjust the blower on delay so the air isnt as cold...
Flame roll out, change the board. Imagine if all mechanics did the same!
Depends how hard its raining and from what direction. Ive serviced RTUs in the rain by putting the panels on top with a patio slab from the roof to stay dry.
Are you referring to the limit switch?
You could have a crack in the porcelain around the flame sensor that once heated expands and grounds out
that would be great! I just got back from Nashville Tennessee with Goodman Manufacturing speaking to some of the west coast guys. G3 fitter- restricted to furnace cleanings alone and under the...
winter rolling in now doing heat start up and inspections.. working on a funeral home today doing a start up before the place opens ( trying to get all the kinks out so we dont have to return when...
Hello from Ontario,
Ive been part of the hvac trade since my conception lol.. my mom would drive around pregnant with my dad who is self employed on some late night service calls to keep him...
Hello. Been in the trade for 6 years now licensed g1 fitter and refrig mech