Search:

Guess I should have mentioned that it is on Natural Gas.

If the wall switch is in the off position nothing will work. With the switch in the on position the remote will work.

I see what looks...

We have a Twilight II Heat n Glo fireplace using the Intellifire control which uses the RCT-MLT-II remote control unit. Also there is a wall switch for the fireplace as well and no blower. So my...

The units sit next to each other.... some pics..

http://i72.photobucket.com/albums/i170/mpnx2/008-1.jpg

Return Air
http://i72.photobucket.com/albums/i170/mpnx2/009-1.jpg

Return Air For...

The furnace portion is in the attic and then the condensers are outside...

So two furnaces in the attic and two condensers outside...

Looks like the closest listing on Bpi.org for me is 97 miles away...

Maybe I will give them a call Monday

Thats seems to be what I got. I dont even know how much tonnage I need. 10 tons seems excessive. Our home is a bit over 3200 sq ft. But I do have some rooms with 14' ceilings so I know this adds alot...

Seems that it is lower during the heating seasons. Seems I am always getting shocked from the static. Acullay I have noticed it quite a bit lately. Will have the unit in the "System Off" more lower...

Our home built in late '07 has the Carrier Infinity unit installed. We have 2 5ton units. I am interested in learning more about the humidity control option available for our system. I understand...

I assume that should be up in the attic under the air handler? I know there is a drain pipe that runs out onto my patio...

Well.....for an update Carrier is coming out to look at the units next...

I dont mind paying a higher price if the work is preformed well.

I forwarded this thread to my GC.....

I will keep everyone posted on the outcome...

Dash....do you want to come to CA high...

Thats the whole home.....with those numbers what kind of tonnage should I be using?

One unit just gave me a "System Malfunction" on the control. I looked at the faults and it says "Possible Frozen...

Some added info....

Along with my blueprints I found my Certification on Compliance...

It has the HAVC info on it from the acrhitect.

Total Heating Load (Btu/hr)
Furnace 71967

Sensible...

r

The control is now displaying the filter notification....

I will call Carrier but accroding to the webstie they are now closed... So I will call Tuesday.

As long as its fixed properly thats fine.

I changed the Filter uder the Accessories menu to...

Under the install menu I changed it from EAC to Media+EAC we will see what happens...

So there is nothing published about the SP in these units?

Thanks for everyones help...I cant be the only...

I dont know what the coil is in that pictures....great this keeps getting worse..

What is PD pressure Drop:confused:

He said he had it setup for EAC on a timed basis...

Some is flex the other is covered with insulation and its stiff so I assume its sheet metal...some pictures

http://i72.photobucket.com/albums/i170/mpnx2/Picture768-1.jpg
...

I ask him and he said no for both....

These units are capable of 1750 each correct?

I am not going to let it drop if he thinks so he is mistaken..neither will my GC. I do know the ducting is...

What is filter measuring PD?

He said code 161 was from high SP which it clearly states....

codes 31, and 32 high and low pressure switch open he never really explained....
Zone2 sirflow...

Unit one with 3 zones all open the unit says the zones are at 15 or open

SP is 1.14 High Stage


Second unit with all four zones open

Sp is 1.01 High Stage

Well my GC and the HVAC company just left. The installer was able to lower the SP a bit on each unit by first looking in the Air Handlers in the attic and found some of the isulation was blocking the...

I have an appt setup with my GC and the installers in Friday...I will show them everything that I have found and go from there.....

From what I have read it seems Carrier stands behind there...

I am working on that as we speak....my GC will be by today for some other things and I will let him know then....I will keep everyone posted..