Search:

Hell sounds just like what JCI(that's jesus christ inc. for you that don't know)is doing with what is left of YORK.

Chiiler32 What office are you out of ?

Yea if your such a hack you can't keep the tower fan working properly ,you will hate a VSD. Even more if you have the only one truely built for a Chiller.

Not to forget plugging up the oil control ports so that tiny allen set screw doesnt get lost in the compressor. My arms are always chopped up after working thru the D rings




LOL YEP that...

The only trick besides using a ratchet is getting that dam allen wrench in the holes you can't see unless you have 4 arms and two sets of eyes,there is no aligment .Only one measurement to check.

You need to come out and drink your blue koolaid .......:eek:

G.C. I know who you are , you can't hind behind that screen name YORKBOY LOL LOL.......

A whole lot of screws , you will be ahead of the game to use a boom truck or crane , getting them out is nothing at all just remove the screws and pull it out. If it's the outter coils if the inside...

In SoCal with JCI, SIEMENS, HONEYWELL it is true that the Union Guys make more money hourly. But when it all pans out
the 33 and change they make is actually about 26-27 an hour.
Depending on what...

Well heres my way to handle all this is that I promised the control guys that if they won't work on my cent. and screw chillers I won't ever touch anything involving their control thing of majigs.

quote:
--------------------------------------------------------------------------------


Since our last "Altercation" between you & I has resulted in our management keeping us seperated by as...

Richard, I have read your posts on all topics in this forum for the last few years and would have liked to meet you in person. I consider you the guru of chillers based on the astute answers that you...

GO BIG BLUE, GO BIG BLUE , GO BIG BLUE .....RAAHAAA

S has a anti-foaming agent in it

you guys need to check the EPA 608 code that we are all suppose to know it says atleast 500 microns. I know you all know that just a freindly reminder

Put your micron measuring device right on your pump and see what your pump reads by it'self,a vacco wet bulb indicator is recomended , and if your in the USA EPA requires you to go to atleast 500...

No Primary Res. Starters are different in that they use Res. moment to limit inrush then close another contact for full voltage , you could say they are more related to auto transformer starters than...

Hard to explain trainning to a store bought union book person.

There you go again RL giving out that secrect info LOL

If you can see the oil on top in the sight glass you have had your pump sucked back more than once. Lose oil isn't that big of a problem unless you have alot of it or a very very small abs. Getting...

You can belive what ol RichardL is telling you , if he tells you a hog can dig taters you better go get some backets!

If your not using the factory for veiwing the test results you are kinda wasting your time. I know everyone thinks that anyone can read results but these machines and Cent. ABS and the other...

Yes I have checked ref. level many times that way with the RTHA that was once one of the methods to check the charge the level info is in relation to the weld seam is usally in the manuals I don't...

Well I did a little looking into your chiller you need to get an oil sample and send off right away. If it is ok you may have a slide valve problem but I think you have bearing problems either way...

Yes if you want to know without a doubt what the level is you stop the chiller connect the bottom of the evap to a high on the cond. with an inline sight glass in between. You should get an oil...