Search:

If your Vent Stack(flue pipe) is 2" PVC pipe it will produce water in the heating mode.

So how do you like what you have? If you are happy with it stay with the same type, if not change.

How hot is the attic getting, could be heat intrusion. May need an attic exhaust fan, how old is the home?

Sounds like it is/was frozen up and water is dripping from the ice onto your filter. Could be as simple as a dirty coil or filter causing it , or could be numerous expensive items. You need a pro to...

Is your lot #191 ? They maybe gave you the wrong #'s? Upstairs is way off in my opinion.

There are numerous possibilites of what it could be. Get a pro out to look at it,could be simple(tstat issues) or a little complicated. Or just set up to run that way. Without any numbers I can't...

Make model and serial numers would help to answer your question better.

Amp draw on the compressor?

The hot surface igniter itself should never be touched ,it should be only handled by the ceramic base. The life of it is reduced drastically if you touch the "glow" portion of the igniter.

The only, and I mean only draw back I see with a 1 truck company is the response time when you need it. If he/she has installed a bunch in the course of a year and for some unforeseen reason there...

No, if you are after lower utillity bills keep what you have. Gas WILL cost you more to operate.

1 cool 3 heat to get the most out of it, or at least 1 cool 2 heat to get almost all of it's capabillities. I would be happy with 1c 2 h and have the (2nd stage heat on the furnace) come on after so...

First without the model number from your indoor coil (which I doubt is 13 seer) I can't say you will get 13 seer out of the new outdoor unit, I know you won't,#4. #2 seems to be the best from what...

He is probably reading from leg to ground/neutral which would be 240 across the 2 hot legs.But not sure, he is in over his head though.

what ever size they give you, make sure the generator has a "line conditioner" to clean up the dirty sine waves so it doesn't mess up any and all electronic circuit boards you might have in what ever...

do you have carpet in the house, if so is it dirty/discolored around the walls and at the walls going up any stairs you might have? If so it is under negative pressure. You will pull air from where...

Where do you live and is the heat on? could be the humidifier coming on, not sure without more info.

Your heat cool diff. is the dead band between them going bach and forth from heat to cool in the auto change over mode. Not the temp change from cylcing on and off. You could try and have your Cycles...

Does the unit quit heating when it freezes over or does it still heat? Maybe normal.or sensing bulb isnot in the correct place on the coil or just bad.

what causes that is a loose connection, with a loose connection you have resistance,with resistance you have heat,with heat you melt/burnstuff up.

Lineset sizes would be nice too.

what size duct is behind the filters ?

Glad you could help yourself.

First question is how does it perform as it is? Ductwork design is an art/science. With that said the person designing it can do a killer job on paper, but when on the job the builder can shrink...

If you can afford the install cost GEO Thermal would be the way to go. It's pricey though.