Search:

Haha why do you guys pull through the schrader on your valve core remover tool?

Compare your micron gauge with another one, that's where I would start.

Damn, you guys really gotta post links or at least models to products you're talking about.

http://www.contractorsdirect.com/core/media/media.nl?id=7898&c=494083&h=d74ddf601afb04d31153

Take the top strap off for better comfort. I wear these all day long, they keep my knees very...

Thanks Jim, that looks like it would definitely work. I wonder how I would adapt my lines to that though. I guess a turbine meter is what I should research.

I need a meter that will test water flow in GPM. I am searching for something both portable for field service and stationary for plant use. The purpose is to confirm flow at water source heat pumps....

I discharge my hoses (allow pressure to draw back through low side), but I leave some vapour. Don't you put air in the system if you empty the hose?

Ug hate the ball valves. Wait until you keep knocking them open while transporting!

Don't waste your time with the small 12v bs. Get Makita 18v, it can do just about anything you want and it's not much larger.

I have the Testo H2, but the damn thing is so cheap and flimsy, not happy with it at all. I would definitely like to find a more rugged replacement.

Get this style here: http://kunysleather.com/products/detail002.asp?partNo=KP-309 (at Home Depot)

Remove the top strap and only use the bottom. These are the most comfortable by far. Any other...

I guess I forgot to mention, we are also part time furniture movers. :yes:

Don't get me wrong, sometimes it is not possible to even change the filters on these units. Once or twice we have...

Thanks beachtech.

I have purchased a few Ideal brand products over the years and I have found most their hand tools to be good quality. I have carried their "tuff-tote" tool pouch for about 5 years. Not long after...

Would you mind sharing those charts, Beach?

Very nice! I really appreciate the pictures. That thing has definitely had some hard use over the years. I'm definitely gonna look into some Occidental products.

I'm pretty sure torque wrenches should be zeroed before storing them.

Got any pictures?

Does anyone here own any Occidental stuff? I am interested in some of their tool pouches, but I would really like to see a "real life" picture.

Guinness is the only thing I am drinking these days.

Ha, service those daily. I take them down to do compressors, though.

In my short time in the WSHP game I have abandoned a ceiling mounted unit once or twice and installed a floor model and tied in...

I wouldn't recommend the 905-T2. I liked the quick readings, but the thing is flimsy! Battery cover broke pretty easily after a short fall. Another disadvantage is that there is no option to clamp it...

That doesn't sound good. I deal with the Canadian rep, the guy seems reasonable and I can't picture him pulling that bs. Now that the light works how do you find it?

Why don't I see mass amounts of glue and primer seeping out of the venting? :eek2:

Nice job.

To the OP:

I'm surprised you still have a job. Good luck getting anywhere with that attitude.

Mighty Putty?