Type: Posts; User: Peztoy
Let me take a wild guess. Your marriage recently went down the toilet.
Called Wolseley today. They got back to me in 20 minutes. Turns out there are two compressors in this 2 ton unit. LG recommends replacing both and a discharge tube, probably a screen or something.
Thanks for the reply.
I had called Masters, they say they only deal with the vrf line from LG. I have a resi brand (LS240CP) in a commercial building.
Noble Trade website promotes LG, but don't...
LG ductless a/c where do you get parts? I've called two local suppliers that say they sell the product, but they never call back and seem to lose any info I gave them. Its like they're glad to sell...
Maybe I should have been more specific. Its a fire-stat. It doesn't control delivered air temperature. It shut off the fan during an over temperature condition. Then a manual reset is needed.
I have high air duct temperature thermostat (Siemens 141-0530). Its located in the supply air duct of a commercial office building. Hot water heating coil in an air handler.
Its out of calibration...
Often done in highrise buildings. The best place I've seen condensers in the ceiling is near the buildings large the return air duct.
Have many guys installed this product. ...
Is it the same as King Company, a division of Mestek.
Like sniffing glue and gasoline isn't in anymore.
But on the plus side, now I stop saying it was a loose shraider valve core.
Pictures of two old cro valves.423791423801423811423821423831
2nd and 4th pic. That's what's left of the springs. They must get work hardened over the years and eventually brake. What do you...
I've always known of RSES, always intended to join, but its like going to the doctor for a check up, I just don't go. (and the doctor is free)
So do I tune in next week to see him finish the job?
Winner, winner, chicken dinner.
Another one broke the other day. Lots more to go.
Wonder if the springs are getting work hardened from pressure going up and down for many years.
Cooler is in a pharmaceutical lab. They want to maintain exactly 40*F. The system also has a hot gas valves feeding into evaporator. A hot gas valve feeding at the suction accumulator. A liquid...
R404a walk in in cooler. Suction pressure is 21 psi. Screw is turned all the way in.
I backed the screw all the way out. Then start turning it in. Sporlan documentation says...
A long long time ago I did some selling. (not hvac)
I think I'd need load sizing, estimating.
Another thing would be managing. Then I'd need business training, people management.
In what way could a guy help his company in the office or out of the office.
After many years in the field there must be some knowledge that can be carried over.
Quotes, sales, parts ordering,...
Selling old nameplates? OMG I've been throwing money away.
So it sounds like you "have these courses in high school".
Call the union and get the info you need straight from the horses mouth.
You could braze a tee into the suction line near the compressor. The have the port face down with a short stub to collect oil as it comes back to the compressor.
I don't care what they say. I can be in two places at the same time.
Lowtemp. Can you point me to where you got this info.
I like the idea. Definitely will save some lives. Calling in every hour or whatever just doesn't cut it. A guy can drop dead in seconds. ...
Looks like it has a top over the brick work. Otherwise rain will be pouring down in there.