Search:

Type: Posts; User: DeltaTech

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. @Dallas Duster-- this unit has a single internal...

    @Dallas Duster-- this unit has a single internal pump.

    What we have found --- even though the water fill valve was open, it was not filling the system We manually added water by removing one of...
  2. Nuclrchiller, Yes they are about 3 ft. away from...

    Nuclrchiller,
    Yes they are about 3 ft. away from the unit. I reversed the gauges because thought the return gauge was broken but it is not. I cleaned and flushed the taps.
  3. I found the domestic water valves are open to the...

    I found the domestic water valves are open to the system. There is a back flow preventer then a pressure regulator, the valves are all open. I don't know why they are open or if the should be. The...
  4. Carrier 30RA chiller return water pressure

    Hello,
    I have a customer that has a chilled water system for a school building that has a flow error code. The system has a supply water pressure of 35 psi and the return pressure is about 0-5psi....
  5. Replies
    3
    Views
    270

    Just wanted a second opinion. There is no...

    Just wanted a second opinion. There is no readable wiring diagram on the unit. One thing I didn't mention, when I first got there and turned on the unit after it had been off all night, it clicked a...
  6. Replies
    3
    Views
    270

    Rheem RGAA-08EC gas valve issue

    I was on a no heat service call this morning (Sat)on this Rheem unit. I was finding that the pilot would light and stand for 20 sec. or so and then I would hear solenoid clicking, the pilot would...
  7. Girgling noise at unit start-up and shut down

    Customer has 2 story house, furnace and A coil in attic horizontal. Customer hears girgling when it starts and shuts off. Lennox with TXV. Is this normal ? If not what can be done to keep it quiet?...
  8. Would a evaporative cooler still be the best MUA?...

    Would a evaporative cooler still be the best MUA? I don't know if they make them that small 1200 cfm? The area where the restaurant is located is on a river edge and the humidity ranges from 26% on...
  9. Restaurant kitchen exhaust hood / make up air problem

    I have a customer that has a kitchen that is open to the dining area and the stove area has a 1500 cfm exhaust blower. Next to the hood they have a 5000 cfm evaporative cooler running at full speed...
  10. I've installed 5 Fugitsu systems and they all...

    I've installed 5 Fugitsu systems and they all work great. Customer support is also excellent.
  11. Replies
    20
    Views
    1,367

    Are you checking/replacing the start contactor?...

    Are you checking/replacing the start contactor? /// What barbar said?
  12. Replies
    24
    Views
    2,545

    I just installed 2 Fugitsu units. They are...

    I just installed 2 Fugitsu units. They are awesome! The bigger unit is a ASU15RSL2 and is 21 SEER the smaller was 25. All the Fugitsu units I have installed work great and they are a little less...
  13. Replies
    6
    Views
    622

    410A evaporator coil conversion to R-22

    Has anyone had any experience with a 410A coil TXV conversion to R-22? I have been told that a 036 coil is to small for a R-22 036 condenser. If that is true would you use a bigger coil like a 048...
  14. Replies
    1
    Views
    263

    Found it .... Southwire EZ-IN Mini Split Cable

    Found it .... Southwire EZ-IN Mini Split Cable
  15. Replies
    1
    Views
    263

    Mini Split communication cable

    Hello, I was trying to find the cable mfg that I saw advertising on this site. The electrical cable was for mini-split unit communication. Did anybody happen to write it down? Thanks for any help.
  16. Replies
    21
    Views
    2,091

    This is the Ask Our Pro's forum. In order to post...

    This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread....
  17. Siemans 24v contactor coil keeps failing

    Hi, I have a problem with these 75 amp contactors. Last week I found both compressor contactor coils shorted. ( 2 compressor unit) I find it odd that they would both go exactly at the same time. The...
  18. ORI -- Opens on Rise of Inlet pressure ,, ORD...

    ORI -- Opens on Rise of Inlet pressure ,, ORD -- Opens on Rise of Differential pressure
  19. Replies
    21
    Views
    1,600

    Sometimes I try to "weigh out" the charge when...

    Sometimes I try to "weigh out" the charge when recovering. If you can find a nameplate charge it gives an idea. I'm sure the dirty condenser didn't help anything.
  20. Replies
    21
    Views
    1,600

    High discharge temp, over charge?

    High discharge temp, over charge?
  21. This is the Ask Our Pro's forum. In order to post...

    This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread....
  22. Replies
    9
    Views
    719

    Yes the unit I'm working on is running. I have...

    Yes the unit I'm working on is running. I have 50lb recovery tanks. Could I attach a line from the unit liquid reciever to the liquid tank port and a line from a suction port to the tank vapor port...
  23. Replies
    9
    Views
    719

    Sorry, I'm wondering if there is a recovery...

    Sorry,
    I'm wondering if there is a recovery machine that would be able to remove 100lb quickly.
  24. Replies
    9
    Views
    719

    100+pound recovery machine?

    Could anyone recommend a setup for recovering a large amount of refrigerant quickly? I currently use a Promax RG6000 which is good but very slow.

    Thanks for any ideas
  25. The unit does have a reciever M/N UR108 I agree...

    The unit does have a reciever M/N UR108 I agree the reciever should be storing the extra refrigerant and not the condenser. It appears that the liquid is not being let out of the condenser when it...
Results 1 to 25 of 29
Page 1 of 2 1 2
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event