Search:

Type: Posts; User: KMacK

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    516

    I know this is a very old thread, but I have the...

    I know this is a very old thread, but I have the same question as the OP that never was answered. I am also curious to know if the boiler should be backing off to low fire or modulating as it reaches...
  2. Looking for a deal on (39) Honeywell TR23 **New**

    Just seeing if anyone has a bunch of these sitting on their shelf collecting dust they would like to make me a package deal on.
    If so, Please Message Me.
    Thanks
  3. Replies
    4
    Views
    582

    BACnet MS/TP RS485 Repeater

    What is a Good product to use for this purpose. I have some ALC REP485's that we were using but they seem to be very limited availability and the cost has increased a lot from initially ordering...
  4. It was licensed for The LCD......I ended p...

    It was licensed for The LCD......I ended p contacting Websquad and we verified you cannot use an Embedded WB to program the Reveal. You Have to use a PC with actual software, so we did resolve the...
  5. Anyone have any use for some Circon LLC-200 Controllers that are still new?

    We are clearing out a lot of old, un-used and un-needed inventory from our shop and I figured I would post it up here before for sale relatively chap before filing it with the local waste Management....
  6. Why do the dpi switches need set to 2V for a...

    Why do the dpi switches need set to 2V for a resistive temp setting?
  7. Honeywell Jace w/embedded WB and a reveal display

    Will this work together and be able to be programmed from the Jace itself? Have a customer trying to make the display work, but they are not AX Certified so they don't have the software, just the...
  8. The Wire is all right there located next to the...

    The Wire is all right there located next to the unit, the wiring to the sensor was changed as well. Also, I did not try swapping a controller from another location, but rather installed and addressed...
  9. We didn't ohm out the resistor, but I installed a...

    We didn't ohm out the resistor, but I installed a new one right out of the pack, and its highly unlikely that an old and new one be bad, but I have seen weirder things. Also the controller was...
  10. The DIP Switches are setup correctly and it still...

    The DIP Switches are setup correctly and it still shows 250.00*
    Im really at a loss why its not reading it, Its set up the same as the other 150 units that work, And I have replaced the controller...
  11. I don't have access to Niagara Central so I am...

    I don't have access to Niagara Central so I am not sure whats in this Post.



    Im really not following what you are saying here, I am very new to Tridium and the Jace and most of what you guys...
  12. OK....I didn't even know that existed so I will...

    OK....I didn't even know that existed so I will check it.
    Thanks
  13. I can see other Values so the Addressing is...

    I can see other Values so the Addressing is correct. Are there other DIP switch settings which could cause this? THe Sensor is a R-NI 1K and we have even tried a new sensor. The controller responds,...
  14. Johnson VAV 111-1 controller Problem with FX Jace 600

    So originally last month I had some issues and questions regarding the JCI Stuff and an FX Jace (Other Thread HERE ) and I am still having another issue I cant figure out regarding the SAT Sensors I...
  15. The User Says What is the cause of this or the...

    The User Says
    What is the cause of this or the correction to get help docs working for this individual? If I can get this working I think it would help greatly.
  16. Adding Help Files to an Embedded Workbench on a Jace 600 Remotely

    End user/programmer wants Help files on his Jace as he has never programmed one of these before and wants to look at help files, but Im not sure what are on the files or which to load to his Jace to...
  17. About this Email Notification Banner at the top of the Site

    Why are we having to change our Emails? I don't personalyy have nor have I ever had a "Gmail" account and I am a member of probably 30 Various Forums and most are VBB based like this one and not one...
  18. Replies
    6
    Views
    317

    That was exactly my problem was the fact that the...

    That was exactly my problem was the fact that the CT closes on proof, which would enable the "Disable". What does the "Setpoint" Option do? It says forces it to Setpoint....Ok, that's kind of like an...
  19. Replies
    6
    Views
    317

    There is no fan control, On all the time. We wont...

    There is no fan control, On all the time. We wont be controlling the fan. Ill be controlling two stages of cooling only. I didn't see a way to Incorporate the Fan, and I was just looking to use a CT...
  20. Replies
    6
    Views
    317

    Honeywell T775 Question

    I am trying to control a 2 Stage DX on an old air handler. I think the T775L model will work, but what I am looking for is a way to utilize "Fan proving" into the controller so it doesn't call for...
  21. I don't think it'll be that far off. 2.5T I'd...

    I don't think it'll be that far off. 2.5T I'd what I would have guessed it at. If love to just buy a calc program if anyone knows of one decently priced. I never do residential as I'm a commercial...
  22. Trying to figure out size on old Chrysler Airtemp CU

    Model - 1262500111
    Serial - LM623971


    I can't find any data on this units size. Just wanting to do a matching size swap on a buddies house without doing a re-calc as I don't have a program to do...
  23. SO no other options.....Maybe this is a business...

    SO no other options.....Maybe this is a business someone should get into. I am sure tere is plenty of money to be made with a system such as this.
  24. I just looked at that app and it seems to be...

    I just looked at that app and it seems to be nothing more than a texting app itself. We have unlimited texting now with the company phones so usage isn't an issue, I am just interested in using...
  25. How are you Communicating "Tech to Tech" during commissioning or troubleshooting?

    I am asking because over the years we have used walkie talkies, Nextel and now we text because its quiet in occupied areas, but its not very efficient IMO. SO if you have a Controls Tech at a front...
Results 1 to 25 of 84
Page 1 of 4 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event