Search:

Type: Posts; User: nyrb

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: Leak Lock

    by nyrb
    Replies
    25
    Views
    4,422

    Ditto on the loctite 554, doesn't come apart...

    Ditto on the loctite 554, doesn't come apart easily but it works great.
  2. Replies
    7
    Views
    2,061

    We have a bingo, to bad it's bought and paid for...

    We have a bingo, to bad it's bought and paid for as a permanent fixture just the way it sits.
  3. Replies
    7
    Views
    2,061

    I wish, customer has 2 boilers on Site both in...

    I wish, customer has 2 boilers on Site both in trailers for 5 years now, this trailer has feed water pumps and a deaerator to boot.
  4. Replies
    7
    Views
    2,061

    Tea Kettle in a Trailer... Oh what fun.

    Time for my annual opening of this little tea kettle again... any volunteers??
  5. Replies
    10
    Views
    1,292

    It seems to me that you have liquid refrigerant...

    It seems to me that you have liquid refrigerant flowing through your equalizing line which is giving your TX valve a false evaporator pressure. I'd start with a new TX valve, JMHO.
  6. Replies
    4
    Views
    1,070

    Is this what you're looking for??

    Is this what you're looking for??
  7. Replies
    4
    Views
    1,070

    Missing attachment.

    Missing attachment.
  8. Thread: Trane goes boom!

    by nyrb
    Replies
    10
    Views
    2,080

    It's been a while but I think I fused the primary...

    It's been a while but I think I fused the primary with a pair of 1 amp time delay fuses, this unit was a 600 volt model.
  9. Thread: Trane goes boom!

    by nyrb
    Replies
    10
    Views
    2,080

    I also fused that transformer as there is no...

    I also fused that transformer as there is no overcurrent protection from factory.
  10. Thread: Trane goes boom!

    by nyrb
    Replies
    10
    Views
    2,080

    Here you go, kit part numbers are included. I had...

    Here you go, kit part numbers are included. I had to replace every board and both the high voltage and control wiring harnesses on the last one I did. Trane however came good for all of the parts...
  11. Thread: Trane goes boom!

    by nyrb
    Replies
    10
    Views
    2,080

    Been there done that, I assume your combustion...

    Been there done that, I assume your combustion motor is fried as well. Do you have the most recent service bulletin for that scenario??
  12. Thread: 597 service tech

    by nyrb
    Replies
    8
    Views
    880

    .

    .
  13. Replies
    12
    Views
    1,283

    See attached

    See attached
  14. Replies
    12
    Views
    1,283

    The High fire proving switch is usually internal...

    The High fire proving switch is usually internal to your firing rate mod motor. Is the burner driving to high fire for the purge but not making the end switch??
  15. Replies
    41
    Views
    5,963

    Been there, done that, what a severe PITA. Added...

    Been there, done that, what a severe PITA. Added some fuses to the primary of that transformer to boot, kind of wonder why it wasn't fused in the first place.

    :.02:
  16. Replies
    5
    Views
    574

    Most dual compressor systems I have seen use 1...

    Most dual compressor systems I have seen use 1 pressure control (sometimes 2 for a failsafe) with a few control relays that sequence alternately between the 2 compressors. This lets each compressor...
  17. Replies
    1
    Views
    704

    The stem packings for Honeywell valves has not...

    The stem packings for Honeywell valves has not changed in years, the size you need is always based on the stem diameter (3/8" in your case). I never buy rebuild kits, I stock all 3 sizes of teflon...
  18. Replies
    36
    Views
    2,592

    Some manufacturers stage them and some don't,...

    Some manufacturers stage them and some don't, it's entirely up to the OEM as running 1 alone may cause issues if the piping system was designed for running both. Many manufacturers also recommend...
  19. Replies
    36
    Views
    2,592

    Not that it matters that much but what type of...

    Not that it matters that much but what type of compressors?? Which compressor has the visible oil level, the running compressor or the idle one or are they both running all the time??
  20. Replies
    36
    Views
    2,592

    I am certainly not anti oil separator. I feel...

    I am certainly not anti oil separator. I feel that they just need to used for the right reasons. Installing an oil separator on a system with oil return issues is not going to correct the oil return...
  21. Replies
    36
    Views
    2,592

    It sounds to me like this system was intended run...

    It sounds to me like this system was intended run 100% of the time regardless of load as it is for dehumidification. The compressor issues he has experienced needs to be spelled out a little better...
  22. Replies
    36
    Views
    2,592

    Now that I agree with.

    Now that I agree with.
  23. Replies
    36
    Views
    2,592

    Although the OP doesn't state it I have assumed...

    Although the OP doesn't state it I have assumed that the hot gas and liquid injection is being done locally at the condenser and only has a liquid and suction line at the evaporator as is done by...
  24. Replies
    36
    Views
    2,592

    I agree whole heartedly that you will stop 98% or...

    I agree whole heartedly that you will stop 98% or more of the oil going into circulation, that leaves 1-2% still getting into circulation. On a system running light load and low velocities the oil...
  25. Replies
    36
    Views
    2,592

    Although a very effective means of significantly...

    Although a very effective means of significantly reducing the amount of oil that gets to the evaporator there will still be small percentage that gets past the separator. Adding an oil separator to a...
Results 1 to 25 of 490
Page 1 of 20 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event