Type: Posts; User: vikings
Yes, there is slight play. We have done this about ten times with success. Good luck.
This is what you have to do. You need to raise the evap as high as it will go above the pan. These units were manufactured with the evap down too low - causing these leaks to occur. Do this and...
That is the best way - however, we did remote a system about four years ago and kept the cap tube. We never had a problem.
Only one way to repair this - replace the whole rec.
Do these lights really work, and if so what do they do?
We have a three drawer, 6 drawer, 4 drawer and a three door beer bottle cooler running off of the same compressor. Each box has either one or two evaps with 1/4 ton expansion valves - with the...
Yes, we are repairing alot of these in PA. We only replace the heat exchangers, not the repair kit. More money and easier to do. Even if the heat x is not cracked - replace the heat x.
What is the going rate for a residential HVAC salesman. Is it only commission or both salary and commission. What is the % of commission. Also, if anyone knows a salesman in the south NJ area...
The question should be how much are you worth to the company and how dedicated are you?. Thats how much you should be making. Get real
Stretch out you check valve spring - you are losing water passed the CV.
You could install a door closer or curtain. Kitchen people do not understand the concept of closing the door!
Thanks guys for all of your help. We sometimes add recievers and TXV's with those odd ball applications.
What is everyone using for a replacement for r-12 for a freezer? 409 or hot shot?
These units are cheap and GE is better. However, you can make more money on repairs with the Freds.