Search:

make sure the liquid line solenoid is not sticking,check the txv,make sure the dump valve is not stuck open,and water inlet valve.

where can i find a schematic for a mitsubishi freezer shipping container,

you can learn alot from a dummy

check your evaporator fans make sure at right rpms

you can use them they work fine

sounds like a bad electrical connection somewhere.or the blower is under alot of strain from the pully assembly

ive had this problem before make sure that when the system gose into defrost that the fans shut off

you should have brought your shorts with you and went swimming

hoshizaki icemachines are way over priced.

ive had this problem with iceomatic if the icemaker doesnt drop the ice,there is a hidden 2 wire switch that is hidden under the armaflex on the suction line i think your problem is there its a...

there are manitwoc icemachine out there that are still working that are 20 years plus nothing chipping

the only thing they have good are the s/s evaporators

has anyone worked on cold tech refrigerators or freezers what do you think about there designs

the finns on the coil are still straight

what causes a evaporator copper line to deflate into a u

was the machine on/off switch turned to ice

they were bought buy cornelious refrigerators there shematics are the same as ross temp dont think there in operation anymore

check the thermister i think your problem might be there

make sure that the tstat bulb is in the right place and pushed in far enough. if it is then replace with ranco A12701

have one forsale email teenyaking@aol.com

txv systems last way longer than captube systems, but if you should get a captube system get a true freezer,the compressors are located at the bottom of the unit,its the same...

it should have plugged the filter,before the captube, make shore the end of captube is open, if not replace the whole captube, there only about 8 dollars

you might check to see if water is leaking from the icemaker
which would explain water in the bottom of the freezer someone may have broken something by craming food in the freezer

You might want to check the captube size and length if you put to much freon in a traulsen by 5 ounces more or less the coil wont get cold enough this is a critical charge system if it doesnt have a...

you might want to try ARS supply out of oakland,ca they use to sell ross temp.also they changed the name of ross temp to cornelius icemachines the shematics are the same ass the old ross temp...

it seems there might be to much freon in the system