Search:

Yes there is a base setup (Macro). If this drive is on a pump or ahu, I would bet the farm that it is set for the HVAC macro. If so, unless someone has altered some of the parameters, it will auto...

w~p

You will have to call johnson controls for the part number on this. They havent sold these Obsys dongles in quite a while and barely still support it. They are available however through the...

Hardlock? Are you talking about the dongle for York ISN Facility Manager?

That setup and wiring should work. Make sure JP56 on the Micro is set to EMS and not modem. JP58 on the Micro needs to be set to 485 and not 232 as well. Set the chiller rotary ID switch on the...

Is this an OptiView or a one line panel? What port are you coming off the ELink to the chiller? What port and terminal's did you land to on the MicroBoard from the Elink? What port is the 3rd party...

You have mail.

Is it a MicroGateway or an E-Link?
Does the CCN talk directly to the MicroGateway/E-Link?
If it is a MicroGateway, what is the last 3 digits in the eeprom part number?

.

.

The York interface you speak of will either be a MicroGateway or the new version called an E-Link. Both have a QuickStart setup that has to be perfomed and then should start talking to your third...

TomT,

The Pathfinder is merely a router...Just part of what I would guess, is a large network, given the fact a Pathfinder is even being used. It has no logic what so ever. How many nodes or...

I may be able to help you...you need info on the Pathfinder or ISN?

Bill

Use nothing but 567 here...

You have mail.

Bill

Whats you e-mail and model number of the screw chiller?

Bill

Mod, Lon and Bacnet protocol's are availible and are all viable options. Ascii, ISN and N2 are availible as well. Depends on what protocol your Honeywell system talks or can talk. They all send and...

Your best bet is to drill through the hub and each blade where they come into the hub and put a stainless steel screw through it. I have done a bunch of these and it works fine. About a 3/16th inch...

They closed the factory store???

Reset the VSD?....did it, or does it have a fault now? What type of fault needs to be reset?

Baker Distributing (Baker Bros.) is the product and parts dealer here in Florida. Hope this helped!

http://www.bakerdist.com/products/line_card_1.asp

Streetsmart, where did you hear that? I would have thought that number would have been higher actually.


Flange, what area do you work in?



[Edited by RoadRunner on 10-09-2006 at 06:06 PM]

Is this the same design you told me about when we were working together at that plant in south Georgia?

What kind of amps do you have? Actual compared to rated. I agree with 3rdgenhvac. Sounds like it may be busted valves in the compressor.

just my 2 cents..




[Edited by RoadRunner on...

One in my area here, and a couple more north of me that RichardL maintains. Works really good. Chiller and engine both. There practical and reliable if thats what the facility needs or wants. However...

Call your local York Factory office then and ask them to order it for you. Order the form number from the previous post. I assure you this is valid and the correct form you need. What part of the...