Search:

Type: Posts; User: mikebaker1129

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    14
    Views
    455

    Yes Uniweld makes them and they are sold at...

    Yes Uniweld makes them and they are sold at Johnstone supply around here for around $50 .The steel units for the B tanks and 40 Nitrogen are a little less $.
  2. Wanted: Broken torches,regulators,hoses,adapters

    I am looking for your broken B tank hoses that are dry rotted,regulators that are busted or have diaphrams that are busted,MC regulators that are damaged ,torch tips,adapters from MC to B , B to MC ....
  3. Lots of portable buildings ,GE modulars etc. use...

    Lots of portable buildings ,GE modulars etc. use this type of units. I worked on 100's of these in the chemical plant, both on analyser buildings,temporarytrailers and sub stations.
    I see they are...
  4. Replies
    7
    Views
    668

    Eugene,thanks, that is what I was after ! I have...

    Eugene,thanks, that is what I was after !
    I have a Maragaritaville bahama model NIB sitting on the kitchen floor,purchased for my wife for "Mother's Day",but today she had the great idea to take...
  5. Replies
    7
    Views
    668

    Best margarita machine ?

    I am a licensed HVAC contractor, but my day job is as a Commercial /Industrial HVAC tech .
    The wife and I are looking for a Top quality Margarita machine for the house for our own use and for...
  6. Replies
    13
    Views
    1,010

    I have been accepted , but I am waiting for my...

    I have been accepted , but I am waiting for my status to to be updated from a regular member to a Pro.
    I guess patience is virtue !
  7. I have worked on my share of bards and few other...

    I have worked on my share of bards and few other brands that escape my memory back in the days when I worked at a refinery . I know what you mean about the safety rules ,try to explain that R22 will...
  8. Replies
    55
    Views
    3,336

    Okay fellas I checked my static with a magnahelic...

    Okay fellas I checked my static with a magnahelic ,which is what I called a manometer earlier but I have my readings of .35 on the supply and .35 on the return ,so .7 it is and it looks as if the cfm...
  9. Thread: Question

    by mikebaker1129
    Replies
    2
    Views
    421

    Kingwood is in the Houston area , infact just on...

    Kingwood is in the Houston area , infact just on the other side of the Lake from me .
  10. Replies
    31
    Views
    2,115

    I am in the same boat , I have my license and...

    I am in the same boat , I have my license and insuranceand have had it for just over a year and haven't done the 1st job . I like the others value my family time and if I do intend on doing a job ,I...
  11. Replies
    55
    Views
    3,336

    Thanks for the help so far. I am not interested...

    Thanks for the help so far. I am not interested in the warranty at all . It seems to me that somehow the job was not done correctly. I know all anout the sue happy people in TX and while I am not...
  12. Replies
    55
    Views
    3,336

    Okay fellas , I located my manometer, I just need...

    Okay fellas , I located my manometer, I just need to get a piece of tubing for it and verify air flow . Any thoughts that my R/A plenum might be to large ?
    I did some checking on my ductulator and...
  13. Replies
    55
    Views
    3,336

    Okay fellas , I located my manometer, I just need...

    Okay fellas , I located my manometer, I just need to get a piece of tubing for it and verify air flow . Any thoughts that my R/A plenum might be to large ?
    I did some checking on my ductulator and...
  14. Replies
    55
    Views
    3,336

    Yes, it is a gas furnace 70,000 in , 56,000 out ....

    Yes, it is a gas furnace 70,000 in , 56,000 out .
    Yes the duct is R6 and the windows are double pane . I do have ceiling fans installed and we do use them . Not sure about the insulation,I want to...
  15. Replies
    55
    Views
    3,336

    Okay in hand is the Model# for the air handler ...

    Okay in hand is the Model# for the air handler
    GMS8070 # GMS80703ANBA
    70,000 BTU with a output of 56,000 . It has a 1/3 HP motor. I do not have the data book for this ,but I will pick one up from...
  16. Replies
    55
    Views
    3,336

    Yes , but this is a new home .I live just the...

    Yes , but this is a new home .I live just the other side of the lake ,very close to the bridge.You can see the bridge from the boat launch in our home owners association. Our house is 1532 sq ft.,I...
  17. Replies
    55
    Views
    3,336

    I have the product installtion instructions but...

    I have the product installtion instructions but no product Data book .
    So I can only assume that 400 cfm/ ton that it is infact a 1200 cfm unit on high speed .
    I am sure that they did not change...
  18. Replies
    55
    Views
    3,336

    I did not realize the unit was a 2.5 !:confused:....

    I did not realize the unit was a 2.5 !:confused:.
    Yes , I verified the piston sizes .
    No I did not check airflow or static . I believe I have a manometer at my storage . I am going to go get it !...
  19. Replies
    55
    Views
    3,336

    I just checked pressures: 84 psig 250psig...

    I just checked pressures:
    84 psig
    250psig
    50*evap
    115* cond
    35*superheat
    28* subcooling
    Installing the .065 flow rater did not correct the issues.I am tempted to install the .078 for now and...
  20. Replies
    55
    Views
    3,336

    When I pulled it apart it blew out and fell in...

    When I pulled it apart it blew out and fell in the Aux pan.
    I guess some liquid must have bolied off and raise the pressure for m the vaccum that I had it in . R/A Plenum is 16X26 and attached to a...
  21. Replies
    55
    Views
    3,336

    I have a 20X25 R/A grille and a 12X12 in my...

    I have a 20X25 R/A grille and a 12X12 in my bedroom. I did not measure the plenum,but it looked sufficent with about 18" flex attaching the 2.

    Are you saying the teflon seal goes facing the liquid...
  22. Replies
    55
    Views
    3,336

    I am going to apply for pro membership when I get...

    I am going to apply for pro membership when I get my 15 posts in !
  23. Replies
    55
    Views
    3,336

    Goodman ? Grabbing for straws !

    Okay fellas this one has me banging my head against the wall and nothing seems right . Here is the scenario .New house (8 months old, Moved in in DEC.), new Condensing unit 3 ton Goodman model...
  24. Replies
    16
    Views
    1,044

    Good for you ! My Dad had a big brother when he...

    Good for you ! My Dad had a big brother when he was younger and he told me some very good stories.
    A very selfless act on your part . You should be proud of yourself .
  25. Replies
    15
    Views
    1,035

    Try a product called Thermal Trap. It comes in a...

    Try a product called Thermal Trap. It comes in a tube like tooth paste and works really well !
Results 1 to 25 of 32
Page 1 of 2 1 2
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event