Search:

Type: Posts; User: wildflower

Search: Search took 0.00 seconds.

  1. Thanks for helping me understand the problem and...

    Thanks for helping me understand the problem and solution.

    It's fabulous to know there are knowledgeable, helpful professionals literally at my finger tips.

    Take Care. :D
  2. beenthere thanks, your tag line rings so true...

    beenthere thanks, your tag line rings so true with my experience with several contractors I've had work on the house. All well-recommended, in business 15-30 years, with local references. Do not know...
  3. The only two returns (pre-existing - just bought...

    The only two returns (pre-existing - just bought house in July) are both on the first floor in Zone 1. The HVAC company and I have discussed the fact the returns downstairs may be pulling warm air...
  4. So they should order 24 x 8 w/ transitions and...

    So they should order 24 x 8 w/ transitions and sleeve? Or what size?

    Given all the others are 6" or 8" round ducts, except one other old rectangular one that it 10.25"wx4.5"H, is it possible that...
  5. What is a transition? And, what do you mean...

    What is a transition? And, what do you mean salesman ooops? Can we not do zones effectively because of the duct size? The salesman was the owner of the company.

    Forgive my naivete, but I am so...
  6. It's a Honeywell damper. The Damper actuator...

    It's a Honeywell damper. The Damper actuator reads 24VAC 60Hz 6W. Is that the size 24"L, 6"W? What should they have installed?

    GO BOLTZ - Lived in SD 11 years, moving back in couple years.
  7. The external measurements of the trunk/duct is...

    The external measurements of the trunk/duct is 24"W x 7.25"H. Are there different types of dampers, some that close more tightly than others?
  8. Beenthere, thank you. What should I insist they...

    Beenthere, thank you. What should I insist they do to solve the problem? Special order new one? Is adding a second damper a reasonable thing for them to do?
  9. They already replaced a smaller damper with the...

    They already replaced a smaller damper with the largest one that fits the non-standard duct. I was told it still left about 1" open around it, which they foamed to fill it in. I still need to know...
  10. Excessive blow-by air in Zone 1 when only Zone 2 called.

    I had a 2 Stage-2 Zone Trane heat pump/furnace system installed about 6 months ago. Except for the main trunk to Zone 1, the duct runs from the basement to the existing upper floor duct work were...
Results 1 to 10 of 10
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event