Search:

You will need to get a pressure gauge with a port on there for that, you can search for a geo pressure gauge online

Forgot to ask does the system have Pressure/Temperature ports installed?

You need to get a pressure differential between the inlet/outlet and inlet water temp and look in the system manual. In the system manual it will have a table to tell you the GPM that is going...

I have seen this idea on a lot of commercial plans lately, you are correct their thought process is that the fan seeing as how in a commercial occupied environment would be running all the time it...

WB,

If you have been to a class on these you will know exactly where to find the formula for computing the GPM. If not call your factory rep and they can walk you through it.

NO AIR, it has moisture in it. Just put two tanks on your truck!

I would turn the system off as well. He is correct about OSHA regulations, but I do not believe that regulation would be able to be applied here. You have to think of it from a pure safety standpoint...

Are you sure its not a modulating gas valve, I haven't seen one with it hooked directly to the valve.

Ive been using oxy/act for many years now. I use a rosebud tip and use it all the time it helps distribute the heat around so you don't make holes either and also help when you have to braze 1.25 as...

If you have a 5psi pressure drop through the coax it sounds like your pushing a lot of water through the system. I would suggest looking at the manufacturers information to figure out your gpm. If...

Here is a link with all the information on it. I actually started carrying one of those motor on all my service trucks....

I use Right-J Mobile, very simple to use and hasn't failed me yet!

No I was meaning that I can normally look up the manual on the specific boiler while I'm on-site in case it is not with it, you can be in this business for many years and you will never know...

I just used an Azure, I think that is the name last week, that replaces X13 and PSC Motors. The price tag is rough but I think its a good one to at least keep on the truck it is even multi-voltage...

It is definitely deserved at times!

Thanks for the info, it is nice having an iPad so I can look everything up manual wise when I am on-site. Ill definitely do a little more digging.

Wouldn't have flown in NC, they are tight on inspections here!

You have to pull down the handle and you'll see it on the right side. We have had tons of issues with TruSteam and check with your local supply house I believe they are under some sort of recall...

In my neck of the woods their aren't many boilers sold, but there are a lot of existing ones in the field. I understand the basics, but am looking for more training. Being in Southeastern NC we don't...

I love oil heaters, shockingly we are the only company in my town that work on them. I am 33 and have been working on them with my dad since I was 13 years old. If you do the proper maintenance and...

I would say 1970-80

Looking for a Residential/Light Commercial Service Technician with at least 2 years field experience. Competitive Pay, Benefits and Commissions! Apply in person at 585 Gillespie St Fayetteville,...

If its an OEM replacement then I would say your covered. You could always ask for a rating given the new compressor BTU to confirm capacity, and save the document.

Most of the time if we install a dual fuel system and do not use the manufacturers thermostat, which would hopefully know how to control their system, we use a Prestige IAQ and set the HP Condenser...

Personally I try to take care of all the preventive maintenance items on the first trip if the customer will agree to the pricing. If they don't I still list it as an option that they denied, saves...

We have not installed any of the Tranquility 22's due to the price difference between that and the 27, so unfortunately i can't give you any first hand advice on it. If you are still comparing it...

That means they did not attend training, the interesting thing about bosch is that if you don't attend training you won't have the book to correctly start the system up. i am located in southern NC....

What everyone is telling you above about cutting around the leak and the fin material is spot on, just make sure you inform the customer and let him know what you are going to do. If he just replaced...

We wear them during the summer here in southern NC, the reason we switched to them is during the winter we had a gas pack rollout and caught a sleeve on fire the worst part for the guy was getting...

We just use a standard gas pressure washer and use a special tip that a lot of brick masons use for spraying acid on the bricks and then rinsing it off, it picks up the coil cleaner and dilutes it at...

Really isn't a lot of difference between the two, i have installed both. We are just getting better prices on the bosch right now

Wrightsoft RightMobile J, it will work on one mobile device and one laptop. Its great for doing block loads. They also have Wrightmobile Consultant which is good because you can customize ARI Matched...

Ive put several of them in, especially in dusty or high humidity environments