Search:

I have used my 6 cfm pump on 500 ton chillers without any issues. Just pull with 1/2" hose. It's pulled them down with no prob.

I still use my veto LC I bought bought 4-5 yrs ago. It is still in good condition other than a couple of zippers lost. Recently I picked up a Klein backpack to use during pms. Got it due to veto...

At our shop A/C techs on call about every 3 months. Us chiller techs every 5 wks. And controls tech weekly, last I checked. The A/C tech carries the on call phone and has a backup on call tech. ...

10 4 will order replacement tomorrow

Today while starting up a comp on a chiller I noticed one of my pipe clamp probes did not register. I tried on both sides but no luck. I noticed one of the pins broke. Is there a way to repair or...

There is no place nearby and unit is installed in center of warehouse. There is no sewer or drain in building due to its just a parts storage. GC wants to pump condensate up to roof.

No sink or janitors closet nearby. Only option is pump up to roof.

Has anyone used a condensate pump for a commercial split system? Unit is 7.5 tons and there is no where to run PVC drain lines. Only solution is to go to roof 20' high.

I waited last year for anticipated release of 11. Could not wait any longer, so sometime in end of Nov I just bout me some testo 550. So far I am happy with product. It was a step up from digimon.

I use yellow jacket 6075

That's why I use 1/2" hose. Can pull a 500+ton chiller down faster than the pumps we carry in our trucks.

Welch pumps are what we use for large chillers when we want to pull fast. Check out eBay for some used ones.

I have the LC. I would recommend a collapsable hand truck to haul around. By the time you load bag you are looking at close to 50# so the hand truck is a back and shoulder saver if you have to walk...

Have both h10 and h10pm. Can't beat reliability of both. Now I just use the pm since I don't have to pull a cord.

Fluke 902 and 179

I have a tank heater I picked up at grainger, it has adjustable temp knob. But I have used on occasion a handheld mapp gas torch I picked up at lowes. I use blanket when I have 120v nearby and...

Should of gotten a FLUKE:D

That's what the meter is for

I have used utektek and then have gone over it with 15%.

Thanks for feedback. I will change liquid to 3/8".

Question in installing 5ton commercial split systems with Puron Refrigerant. The line set to one unit is approx 80' and the other about 30'. The unit connections are 3/8 and 7/8. I was hanging 1...

I have had several GTN's with the OEM ice cube relays failing and giving the code to55. They are for the compressor feedback signal and if i remember right are 5vdc through contacts. I swapped out...

Chiller Tex? What happened to stuttering wes?

I bought mine LC on the net. And yes these bags are good. My old bags would last about a yr before they either tore or no longer stood upright. I have had this bag over a yr and still going strong....

I just bought mine through ebay, it showed it was the last one. Plus I got to use a ebay coupon which gave me a discount. I will be watching for its arrival.