Type: Posts; User: beer-b-q
It is running great -5 suction 105 high.
I did it looked good to me.
The equalization was taking a while.
I got it fixed. When I installed new drier last time I crimped the cap tube. Thank you all.
I put the tube in about an inch last time. I will cut off and try again.
Thank you all I will look into the sporlan filter.
I replaced it because of lra and I weighed in 5 oz.
I did install the shrader valve.
Sorry about that 134 I did install low side port negative 10 psi on the suction.
I have a whirpool sxs that has a restriction. I replaced the compressor egy80 and installed a new drier and ran fine for 3 weeks. My liquid line pressure jumped to 195 and no cooling. I am...
75.00 every 2 weeks I live close to work thank god.
Thanks for the reply. The way I'm reading the manual it is saying to install the dryer 5" above the brazing point or above the txv, am I wrong in this thinking.
grilled steaks sound good.
Why does carrier say to install the liquid line dryer inside before it goes into the coil. I'm not an expert but I've alway installed them on the outside unit.
I think the carrier is a 2.5 ton and the trane is a 2 ton. Go to their websites and enter your model numbers.
I bought some sugar maple chips once and oh my god that was good. I cant find it anymore.
charcoal or mesquite.
all of the above.
thanks that worked.
When I click on a thread the last response pops up first. I would like to see the threads in order of response.
http://www.barbecuen.com/formmail.htm This site is a monthly email they send good recipes and tips.
A lot of injector cleaners have acetone in them.
If it is an older carrier you probally needed a 3 amp fuse.
I have a carrier heat pump that was installed in 94. I am trying to find out what the seer rating is and find a superheat chart. The name plates says to charge by subcooling 9 degrees with a txv. ...