Search:

I replaced this under warranty back in 09 due to display being fogged up. Operators couldn't read the display. There was nothing wrong with the modul other than some fog on plastic cover in front...

I used to get quite a few free lunches at the Steak & Ales, and Bennigans back in the day. Then after 5 maybe a few beers from the Managers. At the Coors warehouse they used to have beer in the...

Looking at a couple service vans to buy. One is a 2007 with 102,000 miles and a 5.4 litre engine. The other is a 2008 with 83,000 and a 4.6 Litre. Both are Ford E-250's.
The 5.4 puffs a...

It is just a Title. The employer will select a Title that he wants to use, either Service Technician, Service Engineer, Service Mechanic, Service Fitter, etc...
Service Engineer sounds more...

I would be interested in hearing what kind of mod's you did. I have 2 Traegers, and have never been able to get over 400 deg.
If you are getting 600-700 deg, do you go through a lot of fire...

Purchased a new guage set a while back, first time I used it I noticed something wierd. Anybody else have a high pressure guage like this?

My understanding is a person pretty much has to get act of venting on video tape, along with a hand written signed confession. Deliver this to EPA HQ. Then POSSIBLY they will check into it.
A...

I did 12 racks on super Bowl Sunday, 3 of the 12 racks were from Costco and other 9 from Cash n Carry.
The Cash n Carry baby back ribs definitely had more meat on them, but Costcos already had...

I got first dibs? what are you asking, email is in my profile.

If you are saying that metal vent pipe may conduct/attract lightning and damage PCB's, yes that's possible. BUT, if that happens a hard wired ground through cord isn't going to help much.

One thing to remember, it will have to come out easily whenever engine needs to be serviced. That's one thing I hate about the center console storage boxes, always a pain in the butt to remove when...

I would try doing a search on this site. Just saying. :gah:

Blue Screw Driver= 2%. But I am in Montreal this week so that probably explains it.

http://www.trane.com/download/equipmentpdfs/series_vavprc008en.pdf

Heard of Google?

Set it up for coast to stop like 69 said.

OK, cool I should be able to handle that. Thanks Again.:cheers:

Ken, thanks. Is there only 1 service tool that Carrier makes? If I call the local Commercial office and ask for the Service Tool will they know what I am talking about?

The service tool...

disclaimer: I am not experienced with Carrier CCN devices.

I ran across a Carrier 19EF centrifugal (PIC panel) that is connected to a CC6400 thru serial comm. CC66400 is stand alone device...

Love my Traegers! Won the one on the right in a football pool. $50 got me a $1100 Traeger, Thanks to Harrisons 101 yard interception return for a TD right before halftime. Pittsburg vs Arizona...

you started the chiller motor with no oil pump?

When you pull refrig to change oil pump pull the brg insp cover also.

Then with oil in sump and running oil pump, put a socket on rotor nut and spin shaft.
After sitting for 4 years shaft may...

About the only thing they are good for is hanging from your Cherry tree with fishing line to scare the birds away.

I agree with all the above, you need to get the drives out of that enviroment, or isolate and duct in fresh outside air.
My vote is for Yaskawa if you need to replace, but they will fail in...

OK, thanks, I appreciate it.

Sorry to hijack this thread, but sorta along the same lines.

I lost my notes on setting up hyper term for interfacing with the York panels.
I have the cable and know where to connect the...