Search:

Trues are good for the price. Traulsen, and Hobart are your higher end coolers.

Hobart been around for years and there equipment last for years.

Crystal tip is out of business . But I have taken a Ice-O-Matic purge valve and made it work on a Crystal tip.

Sounds like the evap sensor off the circuit board is bad. Ice builds on the evaporator and when it gets down to a certain temperature, ice should be fully formed on the evap and ready to drop. If the...

Here are some on line training web sites. www.hvacreducation.net www.nalcomfortinstitute.com www.ashrae.org

The 38CKC024340 is only for the outside unit. It is a 2 ton 10 seer R22 outdoor condensing unit. That system will only have one evap coil. If it is an electric unit, the evap coil will be built...

Condenser fan motor should come on unless it is a variable speed motor, or it has a low ambient control on it. Variable speed condenser fan motors come usually on 18 seer and up condensing units. ...

I have worked for a Carrier dealer for 18 years and have worked on many Infinity units. The Infinity unit is a whole lot easier to trouble shoot and work on than a Performance Series. It holds logs...

Most of the time it takes about 5 to 6 hours depending on how much clean up you have to do to the system. For example, it will take more time if you have a burnout with black oil or moisture in the...

If they are the right side you dont have to change the lineset.

Most of them have a sensor that senses the freon and you can replace it. Those sensor go out after a while. Check out the manufacture website.

On cubers use nickel safe and on flakers use stronger cleaner.

It is a cheaper brand like Goodman. Trane, Carrier, Lennox are your better brands.