Type: Posts; User: mrcool
i had crossed a wire, its working thanks
no, i made the cable from a 9pin cable and a 25 pin cable
does anybody know how to directly connect to an andover infinity , i tried a 9 pin to 25 pin cable , pin out 7-7, 2-2, 3-3, and the hyperterminal freezes,
apparently this control needs a transformer that has no voltage reading from common on transformer to ground or neutral on lcx810.
i have no wiring connected to lcx810. i just have power connected
i got an old andover lcx-810, the output relays have failed, computer say on lites on lcx output come on but nothing happening, so i buy a used one install, load program everthing looks ok...... not....
anybody ever work on this case and how are they, a customer of mine just got these cases installed, these were refurbished cases. water lays in the case and freezes over the drain, installed drain...
can you use hyper terminal to back up andover infinity, i ve tried to use it but cant seem to get it done, i have the pdf on "andover programing" it explains it using comm talk, the pdf doesnt say...
i am having a problem trying to backup andover ,i have the andover programers guide and i cant figure it out, cant someone tell me how to back up and reload files
units wont start, water valve has to be open
[Edited by mrcool on 03-25-2006 at 01:04 PM]
need a pdf for trane fan coil model fcdb0601jL0d0d10ab2w00001d0aew00000000000000 and any info on the zone sensor for this unit, baysen0852
[Edited by mrcool on 06-27-2005 at 09:31 PM]
had one lose two motors in 3 yrs
saw a good one today, three year old install of a trane 15 ton rooftop, new store, the air was blowing out the return and main duct was the return, lol, is this a new thing there doing now
have replaced almost every unit in this market,one ice cream and one deli left, cases are next , but before i replace rlw cases have to replace the frame and mullion on 6 cases
replacing condencing unit, dont have any info in my books, and calling hussmann tried that one time took 5 days till i got someone, thanks ICE
Does anybody know the btu load for these ff cases
went on a call once and found a grounded comp comp 7.5 ton semi-hermetic 3 phase, thing ran for 1/2 hour then tripped breaker, there was a punget odor in the gas, we had our own rebuilding shop so...
this has got to be the funniest thing i ever saw..