Search:

I would like to tell him where to go! The spec sheets tell you the proper install that's the way it should be done! Give him the manual it may be that he isn't as up to date on new technologies as he...

What is it you tie off to on the roof?

:) what did I win

Singer or Westinghouse ?

Lennox hs6 possibly

Trouble is having the right jug on the truck. He found the leak on a solenoid valve so he had to go back

Thanks for the reply hope we can get them going

We have a tech on call and he has has a walkin that is flat with 502 on the txv and no other markings. We are trying to get them up and running tonite

Is 408a a drop in for 502

Actually joehvac25 he's on call down here once a month and complains when he has to go out or try's to get us to take his calls cause we are 2 miles closer

I did'nt get to see you use the machine

With that kind of info ill be there in a heart beat

Make sure you check the heat exchanger

The glass in the sand will insulate the the rod making it useless

I had a customer that had a wifi stat got divorced over the summer had fun adjusting the thermostat on his ex

Maybe I'm doing something wrong but I haven't replaced maybe a dozen flame sensors in 25 years

I appreciate all the input ,at 50 and not needing the computer until recently I'm way behind on the times

With global warming and you being in Texas I guess it could happen

Make sure you check the wiring outside especially around the wire ties

I've been reading this sight for a while and ran across how iPads and such make your life easier. Well I made the mistake of saying "Boy this sounds good" to my wife and now I have one. I am computer...

I use a magnahelic to check vent pressures. You need to connect the neg and pos to get a true reading. As for the water check the traps and drain lines also they need to have a vent after the trap....

Sorry,no I've had no problems except with my provider and that's only for a few minutes

Im betting you will be back next year to clean it again. Had a friend that blew a furnace out in his bosses house that had white carpet,
still dont know how he didnt get fired soot everywhere

I love my E350 with Knaphiede KUV body.It has plenty of room for all my tools, parts, and books.

Try measuring the temps at the roll out It shouldnt be even close to the trip temp

I like the magnahilic. I dont like the digital

If you have it in cooling mode the cond. fan should come on with the compressor. I always take the time delay out of the stat since the board has a time delay

I agree with timebuilder there is no information to help trouble shoot this problem

we're not the installing company. got called in to fix somebodys problem. Im not sure how many people have been here but we are trying to make it right.

well, i recoverd two units today. the first was 20 pounds over charged the second was 33 pounds under charged pulled a vacuum on that one and it was holding for about an hour, pressurized it to 500...

Thats what i figured i would do, just thought i might get a heads up before i get down there. thanks for the reply

I need to recover and weigh in the charge on 3 city multi units tomorrow. Is there a way to pump the systems charge into the condenser to make recovery easier? What would be the best way to do this...

Thanks for the replies. supertek, my ladder looks worse than that one did but i havent noticed any splinters. Thanks for the pictures.
I think i will take a closer look at my ladder this weekend...

I was going to a roof top today and got to looking at my ladder, got me to thinking at my age and weight i could be in danger. When should i replace my extension ladder. I know it is at least 6 years...

Flange, with thoughts like that your my new hero

r22 isn that expensive and you wont be using that much

Well at least your honest. I dont think i will appy, kansas is starting to get to cold for me.

i think code does say that the exhaust vent should be 4 foot from a window