Search:

Is there a way to route all alarms to a text file within the FX server? This text file would be constantly updated with new alarms as they come in.

I forgot to add that this is in reference to the FX Supervisor (Jace)

Can sunrise and sunset from the weather service be used to schedule exterior lighting? If so, how?

I also suggest you watch your language.

:cheers: I wasn't shouting, I was emphasizing. I want a combination of both. Thank you for your suggestions. :cheers:

My customer wants to create ANIMATED graphics. Would like recommendations of graphics packages that have been used.

:putergreet: What graphics packages are recommended to build animated graphics for use in the FX Server and FX Supervisors. My customer wants the capability to build the graphics from scratch. ...

Can you set or change the MAC address on the FX Series BACnet Controllers?
LP-FX16X64-000C
LP-FX07D54-000C

I must be getting old. I am trying to put a simple alarm in a DX9100 program.

I will command a pump on and monitor the pump status. If the pump status does not equal the pump command after 60...

You should do your homework before you make comments that are untrue.

Send me your email address and I will email you the Johnson Controls Pneumatic Control Manual

Send me you email address and I will send you the JCI pneumatics control manual.

Can anyone tell me anything about the "FX70"

Is it possible that you are tryin to bind an enumerator to a boolean dynamic?

Does anyone have any terminal designations for this duct detector?

There is a site that has NAE's and FX Supervisors. Can FX Supervisors and NAE's be brought into an FX Server?

My NAE Upgrades look the same

It has been a long time since I messed with NCM's. Push the download button and let the NCM force the download. What software are you using in your PC. Have you looked at the DDL files? Do you...

Do you know what those "secret commands are"? Also can you tell me how to FTP the .img file? This FX40 is a wasted one anyway.

GO SAINTS!

Which command did you use to restore factory defaults. The restore commands that show up on the JCI FX 40 is to restore the password to factory default,

I did try that with no good results.

I have many FX40's out there that are very reliable. I have just had my first FX40 failure last week on a system installed in 2006. The FX40 has a manufacturers warranty of 3 years. If it is still...

The sensor could also be installed in an incorrect location. If the sensor is installed in an area with high turbulence, this could also cause temperature fluctuations.

You can also try creating a special graphic with limited capability and allowing the user access to that graphic ONLY by creating a special NAV file.