Search:

You do not need to reset it. We use this all the time for the same thing you are trying to do. If you attach the alarm to it, the last value will always match what the alarm is. There is no need to...

So it's been almost a year since somebody has replied to this... I"m not sure if there is a rule about bringing back an old thread... So, I'm apologizing ahead of time.

Has anyone had any...

Okay. That makes more sense now. I had a similar problem recently. I set up a Jace's BACnet MS/TP port with identical settings from another jace's station. I couldn't get it to work. I ended up...

I'm trying to understand what you are saying... You have FX Workbench Pro on your laptop and you are running a station on your local host (computer)? And you are trying to discover controllers using...

I have had the Nest for almost a year now. Had two problems... The temperature sensor is infrared only, which means it is reading the temperature of the opposite wall. Unfortunately, I have a small...

It's a Belimo actuator. It's the next size up from the TR24.

http://www.belimo.us/belimo/media//Technical_Documents/valve_actuators/LR_24_SR.pdf

I'm not sure we have had that problem specifically but we have had other problems with the TR24-SR actuators in the past. We spend a little more now and just go with the LRBs instead.

I don't think it's possible to train this guy in a year. There's just no way. Even someone with the necessary drive and intelligence would have a hard time being competent in only a year. 2 to 3...

Got it working. Thanks. I did need to enable the IP Port on the Jace and select which port I was using. I uploaded a controller and then commissioned it and it works great. Thanks for the help!

Hmmm... I didn't even think of that. I did not enable that. I guess I was assuming it was already on. Do I need the Jace licensed for BACnet IP though? I think my license is just for MS/TP.

This...

Yes you can. Or maybe I should say, you should be able to. I just have to figure out exactly how it's done because it wasn't quite working for me. In PCT, when you commission or load a controller,...

This has been an outstanding issue I have had at a particular job site using a FX60 and multiple PCV controllers. I couldn't write to most of my set points on my PCV controllers. I happened to be at...

Has anyone successfully used a jace as a BACnet router using PCT? I'm pretty sure I have everything setup properly because when it tries to connect, it makes it past the connection process. However,...

Nevermind. I got it working. The example of http://111.222.3.444... doesn't work within workbench. Workbench recognizes that as a web address and wants to open it externally with Internet Explorer....

I seem to be having trouble with the realms property. I setup up the realm on two stations under config properties and changed my user to a network user. Now assuming that is all I need to do, I...

Hmmm.... How long are the user time outs? Is there a way to eliminate the time outs so the user doesn't have to log in constantly?

Nevermind, your example goes to the Home.px graphic. But my other question still stands, if its already logged in, it would go straight there without having to log in again right?

Assuming the Jace is already connected and Logged in, it would take you straight to the Root page, correct?

I am opening a workbench remote connection. For example, on FX Server you go the the "file menu" (whatever it's called), then click the open remote site option. Once you do that, you type in the IP...

Can I just go direct to the IP address rather than going to a controller. On FX Server when you click whatever IP address you want in the navigation pane it just takes you to the home page graphic of...

Question for you FX/Niagara guys out there. Using FX Server to access remote stations, is it possible to make a graphic that will link to the IP Addresses of those remote station once they are...

I see. I guess I'll just go for it. I hope I don't have the BT problem though... I guess the worst thing that could happen is I just delete the XP mode instance if I decide it's not worth it.

Well, maybe I should check again but I am pretty sure you can go either way. The way I was mostly testing this out was from CCT to PCT since we already had a lot of files written in CCT. Plus, they...

I need both because we use both the Metasys and FX lines. You can actually open either system with the other as long as you do not assign a controller to the file under "define hardware". From what I...

I know it is not possible to install CCT and PCT on the same system, but has anyone been succesful with installing one on the main system and installing the second on a virtual machine (XP Mode)? If...