Search:

First choice Distech gfx for BACnet MSTP and Lonworks. EasyIO for Sedona and BACnet IP. Second choice Automated Logic and Siemens PPCL. Third KMC and Reliable Controls.

I typically program with Distech GFX Lon or BACnet controllers on a station running on my laptop. If I want to test and debug live before heading off the job site then I connect a controller to my...

I have install several EasyIO30ps using the sedona firmware which requires either AX or Sedona workbench. If you load the BACnet or Modbus firmware then the programing is configured thru a standard...

Controlchick,
Both drivers will allow you to command the Inet points (put Inet points in TEST or Manual). The big difference between Quicksilver's and Infocons (Lynxsprings version ) is that with ...

This will be my first time. Looking forward to seeing the new Infocon / EasyIO products for AX.

Dcontrols,

Lynxsprings Inet driver is Infocon's Inet driver and should run fine on any manufactures Jace( We buy InfoCon drivers thru Lynxspring ). We have used it licensed with a Web Supervisor...

Rjgddc,

We have have had great success with both the Quicksilver Integrations Inet driver and Infocon Inet driver, both work well with a AX Jace.We also use the the Plexus OPC driver to Inet.One...

Zep913,

With the Insight BACnet client option you can add a BACnet BLN and use BOB Siemens (BACnet Object Browser ) to discover and add new BACnet devices and points. If your chiller is BACnet IP...

Zep913,

You may be better off having your customer purchases the BACnet Client option for Insight.Then add a BACnet MSTP to IP router between the the chiller and Insight. This would allow you and...

I'm pretty sure if you have the Sedona firmware loaded in your EasyIO30P controller you can only use the RS-485 port to connect to a Modbus serial network.It's my understanding that if you load the...

I agree the Siemens Proprietary P1 Protocol is pretty rock solid(Worked with it for several years at a branch). But it is nice when you can have choices in the hardware you want to add to the network...

I have been installing the WLT900 on a site for the past year and have found them very reliable and will be probably adding another 100 plus over the next 4 years to this site. Each wireless Lon...

Distech Jaces are open to, so you should be in good shape.

Regards,
Debug69

frontline,
Are you linking discovered Lon proxy points from the Distech controllers or did you use the Wire sheet on the Lon network to link the nvo's from one controller to the nvi's of...

BacNet,

My original plan has been to always integrate to the Teletrol ivav controllers into the new Tridium AX front end. It's not about some of the VAV points aren't available, its about none of...

.

Thanks for your input. This is what I suspected and have dealt with in the past.I find it unfortunate for the customer who wasn't left with a copy of the Teltrol "Edifice software" on site (I...

BacNet,

Thanks for the reply. I have traced out the MSTP network between the Teletrol ebuilding controller and the RTU which has the factory supplied BacNet card installed in it and I can...

BacNet,

Thanks for the reply. I have traced out the MSTP network between the Teletrol ebuilding controller and the RTU which has the factory supplied BacNet card installed in it and I can...

This product from HRW looks interesting. I have not used it but would like to find a distributor here in the US to give it a try.The Siemens P1 protocol version looks like a nice option to.
...

I have a site utilizing several Teletrol TLC-ivav controllers on a MSTP bus connected to a Teletrol ebuilding controller. On this same MSTP network the RTU serving the Teletrol i-vavs has a...

Xarralu,

I have been bench testing the LYX-30P (This is Lynxsprings version of the EasyIO 30P-SF) and have been happy with it. It showed up in a plain cardboard box with no documentation, software...

Churchhvac,

Looking at KMC's catalog under the controller replacement cross- reference the official replacement for a 5502 is a KMD-5802. If the old controller contains PHONE / HANGUP statements,...

I have been using the AIC wireless LON transmitter (WLT900) for the last few months with great success. No problems with device...

basparky,

I work for a controls service contractor that might be able to help you out with some of you issues.Shoot me a email if you wish to discuss.

Regards,
debug69

I’m trying to utilize the fan in nvi input #17 on a ECP 300 gfx controller to supply Avg , High and Low TerminalLoad from 7 Distech VVT controllers. I have linked the discovered Distech VVT...