Search:

Type: Posts; User: AmincControls

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. I see. I'll record that in my memory for future...

    I see. I'll record that in my memory for future use. You helped me a lot today. I was still able to salvage this XP Home Netbook idea. I installed CCT 6.0 on the laptop and it worked fine. I bench...
  2. Awesome. Got it working. I knew I was missing...

    Awesome. Got it working. I knew I was missing something. Thanks for the help.

    One question though... You said, "add the ip of your NCE in the router table." Where is the router table? I didn't do...
  3. So, I did figure out that I was using the wrong...

    So, I did figure out that I was using the wrong Network Address. According to the CCT help file it should be the address of the MS/TP trunk which is 2000. However, I tried that and it's not working...
  4. Question for you... To use the NCE as a BACnet...

    Question for you... To use the NCE as a BACnet router, is there anything that you have to setup on the NCE side to get it to work. Also, do the NCE and FEC sides both have to be at the same revision...
  5. Thank you for the replies. As I suspected though....

    Thank you for the replies. As I suspected though. I figured it wasn't possible but I thought I'd see if anyone did something clever to get it installed and working.
  6. Install SCT/CCT on a Windows XP Home Netbook?

    Okay.... This is a dumb question and I don't think I can do this, but has anyone ever tried to install SCT and CCT on a Windows XP Home edition computer? I have a situation where I might need to but...
  7. Thread: JCI CCT

    by AmincControls
    Replies
    6
    Views
    480

    I sent you an email.

    I sent you an email.
  8. Thread: JCI CCT

    by AmincControls
    Replies
    6
    Views
    480

    What version is the controller? The PID blocks...

    What version is the controller? The PID blocks were significantly upgraded after 5.0 or so. Also, is this a custom program or one of canned Q and A programs?

    You need to investigate a little...
  9. Replies
    0
    Views
    210

    PCG Idle Screen Points Problem

    This is a new one for me... I have several PCG2621 controllers on the latest 6.0.0.9000 revision and I am having a weird problem with the way the points display on the idle screen. Here is the list...
  10. Replies
    3
    Views
    369

    FX40/UNT Override does not release

    Has anyone come across this problem before? What's happening is when you override a BO from the FX40 and then try to release it when you're done, it doesn't release back to default. If you commission...
  11. Replies
    14
    Views
    1,153

    You do not need to reset it. We use this all the...

    You do not need to reset it. We use this all the time for the same thing you are trying to do. If you attach the alarm to it, the last value will always match what the alarm is. There is no need to...
  12. Thread: Panoptix

    by AmincControls
    Replies
    5
    Views
    639

    So it's been almost a year since somebody has...

    So it's been almost a year since somebody has replied to this... I"m not sure if there is a rule about bringing back an old thread... So, I'm apologizing ahead of time.

    Has anyone had any...
  13. Okay. That makes more sense now. I had a similar...

    Okay. That makes more sense now. I had a similar problem recently. I set up a Jace's BACnet MS/TP port with identical settings from another jace's station. I couldn't get it to work. I ended up...
  14. I'm trying to understand what you are saying......

    I'm trying to understand what you are saying... You have FX Workbench Pro on your laptop and you are running a station on your local host (computer)? And you are trying to discover controllers using...
  15. I have had the Nest for almost a year now. Had...

    I have had the Nest for almost a year now. Had two problems... The temperature sensor is infrared only, which means it is reading the temperature of the opposite wall. Unfortunately, I have a small...
  16. Replies
    4
    Views
    585

    It's a Belimo actuator. It's the next size up...

    It's a Belimo actuator. It's the next size up from the TR24.

    http://www.belimo.us/belimo/media//Technical_Documents/valve_actuators/LR_24_SR.pdf
  17. Replies
    4
    Views
    585

    I'm not sure we have had that problem...

    I'm not sure we have had that problem specifically but we have had other problems with the TR24-SR actuators in the past. We spend a little more now and just go with the LRBs instead.
  18. Replies
    25
    Views
    2,604

    I don't think it's possible to train this guy in...

    I don't think it's possible to train this guy in a year. There's just no way. Even someone with the necessary drive and intelligence would have a hard time being competent in only a year. 2 to 3...
  19. Replies
    19
    Views
    1,901

    Got it working. Thanks. I did need to enable the...

    Got it working. Thanks. I did need to enable the IP Port on the Jace and select which port I was using. I uploaded a controller and then commissioned it and it works great. Thanks for the help!
  20. Replies
    19
    Views
    1,901

    Hmmm... I didn't even think of that. I did not...

    Hmmm... I didn't even think of that. I did not enable that. I guess I was assuming it was already on. Do I need the Jace licensed for BACnet IP though? I think my license is just for MS/TP.

    This...
  21. Replies
    19
    Views
    1,901

    Yes you can. Or maybe I should say, you should be...

    Yes you can. Or maybe I should say, you should be able to. I just have to figure out exactly how it's done because it wasn't quite working for me. In PCT, when you commission or load a controller,...
  22. This has been an outstanding issue I have had at...

    This has been an outstanding issue I have had at a particular job site using a FX60 and multiple PCV controllers. I couldn't write to most of my set points on my PCV controllers. I happened to be at...
  23. Replies
    19
    Views
    1,901

    PCT: BACnet Router w/ Jace

    Has anyone successfully used a jace as a BACnet router using PCT? I'm pretty sure I have everything setup properly because when it tries to connect, it makes it past the connection process. However,...
  24. Replies
    14
    Views
    1,131

    Nevermind. I got it working. The example of...

    Nevermind. I got it working. The example of http://111.222.3.444... doesn't work within workbench. Workbench recognizes that as a web address and wants to open it externally with Internet Explorer....
  25. Replies
    14
    Views
    1,131

    I seem to be having trouble with the realms...

    I seem to be having trouble with the realms property. I setup up the realm on two stations under config properties and changed my user to a network user. Now assuming that is all I need to do, I...
Results 1 to 25 of 84
Page 1 of 4 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event