Search:

$16-20/HR Plus quality spiff

In our situation its true... We have extremely high standards and hold our technicians and installers to them. Not sure about Texas but to become a TCS dealer here in GA its a some what difficult. ...

We are an Alpharerta, GA based HVAC contractor and have immediate needs for a Professional residential HVAC installer/Technicians We are a Trane Comfort specialist. With that being said we are held...

Installation of Trane residential and light commercial HVAC systems with duct work modifications.

Educate customers on the benefits of Preventative Maintenance Agreements.

Effectively...

What are you all using when there is a need to run a linest on the exterior walls for longer distances? I've looked at what the supply houses are selling (3X4" chanell) and that is selling almost...

Nice job!! XV95 and CleanEffects....

Welcome Rob... Lots of smart people here... Its been very helpful for me.

Welcome to the jungle!!

Welcome!

Welcome!! Lots of good information to be had here.

I still havn't seen anyone asking if he leak checked the evaporator. Is he assuming that the leak is at the "rust spots" without verifying? The system is only 2 years old, there may be a small...

WE ARE HIRING ASAP!

EXPERIENCED RESIDENTIAL HVAC INSTALLATION (Lead Installers and Helpers)

We are a growing Independent Trane Comfort Specialist located in Alpharetta, GA seeking qualified...

High static pressure is caused by "Resistance"... Has anyone confirmed duct velocity or CFM? Sounds like you need to start from the beginning. Confirm duct sizing, velocitys and if the volumes you...

To answer your question... Your system quoted with either XV-80 is not stimulus eligible.

You need the following to be stimulus eligible with an XL-15i 3 TON System

XL-15i (4TTX5036A1000A)...

Ask friends... Call local contractors and ask how they determine equipment sizing. Dont accept the square footage sizing method. There has got to be someone in Savannah that does it. Most don't do...

George2... How can u make that assumption? 2.5 Tons... What are ceiling heights, windows, single or double payne, house orientation, shaded?, any insulation in the attic?? without doing a sizing its...

The only way to properly calculate heat gain/loss is to measure the home.. This includes windows, doors, ceiling height and home orientation ect... North, South, East, West. We use wrightSoft...

Its amazing to me that Arizona lets someone right out of school start there own HVAC business!! Aren’t there any state licensing, testing and experience required? Here in Georgia for a residential...

Anyone experienced frozen condensate lines with condensing furnaces located in an attic? Here in North Georgia, contractors are mounting these furnaces in attics. The last few years our winter...

We just purchased a new box truck for installations. Anyone willing to show pictures and give recommendations on what works and what doesn't and what shelving options you have? Thanks!!!

We have the Yellow Jacket 69086 digital Vaccum gauge. Works good and seems to be reliable. Been using it for over a year without any problems.

Looking for recommendations on Residential/Commercial load sizing software including duct design modules. Anyone with experience and advice would be greatly appreciated.

Why cant I post a new thread? I recall when I first registered I could.

At the conditions you said the attic is 70 degrees and 86% RH the dewpoint is 65.6 degrees. If there is any metal below 65.6 degrees it will condense just like a soda/beer can. Have your...

Research 3 reputable HVAC contractors in your area. Call them and ask for quotes. They should be more than willing to come out and do this. Tell them your situation. They will need to do an...