Search:

That sucks! Been there myself, although I didn't have as much on the line as you did. The job interview is where you try to fine this out, by asking questions and showing your desire for a long term...

The first generation was prone to break, they have "beefed up" the wire now so that is not a problem.

I went and did the "headphone stereo jack wire" update to the sets that I have (once I got...

You're not the only one that does that, I done it too. Course I'm divorced now. So I can go buy any thing I want as long as the card will handle it.:munching:

Yikes, its gotta be good even the navy requires it on their subs. Which means big $$$$$$.:nopity:

I've used both of them, they both alarmed at the same time when I compared them against each other. The main difference is the warranty period. The company bought the zx and I bought the zx-1 and its...

Thanks, now that I've seen it. I think I can get it at graingers here in town. THanks:CU:

Hey, dennyf do you have a P/N for the loom. I can't seem to locate it online. My nearest fry's is 2 hours away in chicago. ThANKS:CU:

I have a Fooler, works good for me.:patriot:

It was installed that way, so that in the event of a gas leak, the homeowner would quickly smell it.NOT! How much of a girlfriend is she? Looks like you have your work cut out for you.

Best places for $$$ & parts are allpoints, 3wire. Usually have parts in stock, as always setup accounts with vendors to get best prices, depends on volumn you do with them.:patriot:

WOW! thanks iceman, now I don't have to bug Oscar any more.:angel:

I wonder if the cockroaches who got my stuffed veto got to yours. Your taking it a lot better than I did, is all I can say. Hope they rot in !@#. Course I did get me another new veto to stuff. :angel:

HolyChtt batman, I would of wrapped logging chain around that valve/disconnect.:eek2:

That is a Make-up Air burner, Cleaning out the ports with a gage drill bit is the right thing to do, as long as it is done carefully. There is nothing for the flame to impinge on, so no worry there....

Holy crap, veto makes a laptop bag!:pileon:

I want one, going to be up near my favorite tool store in Detroit soon, gotta stop in.

Realize that an instant water heater raises the water temp about 40 degrees, if your incoming water temp is in the 40-50 degree range ( a 80-90 dregree shower is not what most folks want) you will...

A update to what Pilotlight, had in his post "Be careful out there".

Allen was a fellow brother at UA local 172, our paths crossed many times since we had a lot of customers in common. Never saw...

While you're getting the kit get an extra 20 ft. of that silcone hose they have also. :)

Wow that sucks. Worst i ever come across was a two tier roof. 24 ft ladder for the first one then rope a 10 ft'er for the second one. luckily for me it was in the summer, they could go to h!@#, if it...

how do you calulate where to place the bender, so that it goes around the corner properly. I've been estiamating by placing a bend that i cut out as a gage to do it, but there must be a better way...

WOW, thats took a bit of work. what kind of chemical did you use to clean that grease build up?:D

No, do not use the n55b, the pressure is too high. The lower pressure PRV is used to lower the water pressure to an acceptable range so that the rinse cycle works properly. W.P. set too high and the...

Dam, I can't wait to get these. Hell 2 c notes that ain't bad. I'd pay more! One thing I've learned in this biz, if it isn't at least a c note it'll be a throw away tool!
Since its a Digi-cool...

Hey ARPA,

I'm interested, we do commerical kitchen work and service on these also.
Ron:D

Sorry to hear that, I've had good luck with these units. sounds like you have kept in contact with the factory, the reps there seem to be very knowledgeable about there product, and willing to share...