Search:

Type: Posts; User: transy416

Search: Search took 0.00 seconds.

  1. Things were hotter (high 90's) many weeks ago and...

    Things were hotter (high 90's) many weeks ago and I was having no issues. A few weeks ago temps started to drop back to where they should be, with some cooler days. What is strange is that I didn't...
  2. Is there anything I could specify insofar as the...

    Is there anything I could specify insofar as the airflow tests so that I could request that these take place?

    Also, can you be more specific about the problems caused by the bypass damper?
    ...
  3. Right now I have zoning disabled and continue to...

    Right now I have zoning disabled and continue to get errors. Would that still suggest airflow as a possible cause?

    Also, these errors have been occurring over the past few weeks. Why would...
  4. These are the only errors - 114 thermal cutouts...

    These are the only errors - 114 thermal cutouts in low stage, 55 thermal cutouts in high stage, 1 high stage no start, and 91 low contactor open errors. Sometimes these events result in a "System...
  5. I am on my third compressor. The first one they...

    I am on my third compressor. The first one they said "shorted to ground" and that occurred about 1 year after the unit was installed. The second compressor went out earlier this year, and my...
  6. Made an appointment with local Carrier dealer for...

    Made an appointment with local Carrier dealer for today, but unfortunately we had to cancel due to weather. Also, they didn't know anything about the bulletin and said they sent an email to Carrier,...
  7. I also wanted to mention again that I just had...

    I also wanted to mention again that I just had the compressor replaced this past Spring. Can you tell me whether this service bulletin was in effect then, or where I might be able to view a copy of...
  8. I will contact my local Carrier dealer in the...

    I will contact my local Carrier dealer in the morning.

    In terms of the model number, it is a Bristol compressor model number T89A515BBCA.

    When you say Carrier will cover parts and labor or...
  9. Just received a System Malfunction error on the...

    Just received a System Malfunction error on the main user interface. Error is Low Contactor Open. I don't suppose this would also be related to the 03 control board?
  10. Latest version of control board for Infinity

    I have a Carrier Infinity Heat Pump, model 25HNA624A003, that had a second compressor put in it approximately 3 months ago. The high and low stage contactors were also replaced. I came home this...
  11. So no way to disable a single zone via the...

    So no way to disable a single zone via the control panel? Again, I'm not wanting to take apart the zone control module or anything like that... I'm just wanting to disable a basement zone for the...
  12. I appreciate the replies. What I am wondering...

    I appreciate the replies. What I am wondering though is whether a single zone can be disabled via the Infinity User Control Interface? I see how all zoning can be disabled via the interface, but...
  13. Disable single zone with Carrier Infinity System?

    I have a Carrier Infinity system with three zones - living area zone, bedroom zone, and basement zone. I'd like to disable the basement zone so that it receives heated air ONLY when there is a call...
Results 1 to 13 of 13
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event