Search:

40 years old finished in 1971 in melbourne aus. using pneumatic controls and these beams had a drip tray underneath in case of any condensation.
I agree with what flange said building controls must...

Hi
Have worked with a number of buildings with chilled beams one building is 40 years old, still working well. some may have a lint filter which will need to be cleaned. make sure thermostat is in...

Hello
There will be a company that can make a new condensing unit using 134a or maybe off the shelf being 134a. they will need to know pipe sizes, model numbers if any and if you can take the unit...

g' day fridgies
As all the other guys have said, dont go cheap on the belts, make sure all pulleys are in good nick, and are alighned properley.

What are the liebert vt belts I have never heard...

G'day guys sorry I was thinking of another type of machine. Try this link it ios pretty helpful. good luck
http://eto.carrier.com/

Hello
I take it this is on a chiller. what is the model? that fault can also mean phase reversal or power failure. a lot of the scroll compressor chillers will have a phase fail relay which...

hey guys,
had a 30gx playing up about 3 months ago with oil problems, got carrier out there he said that oil can get stuck in the evap, add oil run system to get oil to return then remove oil...

hey mate,
check all comms cables going to all controllers and check any fuses that maybe on controllers/ modules.

hey koala
is it an apac aircon? ducted split or package? apac were a division of apac made in western australia. i take it you are from aus. if so total line should be able to help.

hey there, just had a quick look on R414b it is a gas only used in canada
[ just reading from du pont's website.] looks to be similar as nu22. is you look at the pressure temp chart it shows that...

we had a problem on a unit which kept having leaks on evap coil had it tested in lab said coil was eaten from inside out. i guess from acid build up but compressor was fine

i also agree with the electriian could be a relay buzzing or if there is another contactor in there which could be making the buzzing noise
you will be able to tell which one one it is if you tap...

hey guys thanks for your replys ok where do i start,
compressor was wrong type rated at 25 kw for r404a
long pipe run anly allowed to vac out for an hour,
over charged by 10 kg of refrigerant,
no...

Gday guys
just after some advice on a unit which i was sent to to try and salvage it. a new compressor was put in, a copeland sroller, for an old copeland recip. the compressor is a qr...

hey guys
i would take an oil sample and send it to be tested, they will pick up any brass, copper, steel in the oil,
lukey

hi just did a bathroom upgrade and we have a 3 in1 fan light heater and an extra fan to get air out.
easy and cheap wire it in with the other fan

g'day
just after some information or past expeiriences with communication problems on trane screw chillers . the fault was coming up comms failure on compressor unloader. check terminals for...

hey guys
from what i have seen on here isnt good about the gauges, i was buying the gauges because they have the vac gauge on them ,
price of the gauges are $540+10%gst
a cps vac...

hey guys

just wanted some thoughts on the digmon gauges they are being released in australia. i have ordered a set and are selling like hot cakes.
what dramas have peope seen with...

gday guys
mado has is that a superheat at 6k degrees celcius which roughly works out to 42f (correct me if wrong)
does this machine ever turn off ?is it under sized for the application
i take it...

thanks for your info guys great help, i have no hesitations of getting the electronic gauges now

hey guys
just wanted to know what your thoughts are on yellow jacket tools.
In Aus i havent seen a lot of their tools only know of one shop in melbourne that sells their gear. any tips...

hey guys,
You could conduct a oil acid test, water would also block up tx valves and if there is that much water in it and its getting back to compressor then it would short out the...

hey guys
one thingit could be is the cap tube might be blocked up , have seen it before with simmilar pressures, is it a scroll comp?

hey guys,
what sort of furnace is this ? does it run on refrigerant, or is a gas burner type