Search:

Im charging a 404 unit the other day , and i look down to see the yellow hose with about 10 pinholes in it , all in a row about 2 inches apart, just misting out my 404

I never seen such a thing...

We need another Hitler .... one that hates Muslims though

I just watched a documentary on the holocaust , and Wow that guy did some serious damage

i just patched a evap on one ....2nd tube up from bottom , was not fun

3 .... 5 gallon buckets

:eek2:

I had to adjust that dagone float switch a few times. I think it needs replaced , but im hoping this thing will make ice for a while before the guy begins to think i dont know what the hell im doing....

Take my sister for example , 25 years old , with a 6 year old kid , and has done nothing but sit on her ass and collect welfare. Went from 100 pounds to 180 pounds. Lights up one cigarette with the...

I found out why it wont make ice, evidently when i removed my hoses the high side shrader decided to leak All of the 404 out.... This thing hates me

Well , apparently nothing fixed it , because he just called said its beeping 3 times

I went and reset the board , turned on , it filled water bin , and then it goes into harvest , during harvest...

Replaced txv and drier , good to go

i vac it down this mornin, weighed in 1 pound 10 oz, and I got 250 high 50 low. called tech supp and he said holding bulb inhand then dipping in ice water should give a 15 psi swing. It swung 3 , so...

This being my first time engaging with a water cooled unit , im assuming that over charging it might have made whatever problem it was having Worse.

I say that because yesterday it made ice , and...

No it wasnt totally resetting the board , the red light stayed on whole time , it was just going into test mode

today It went off on high pressure , then entire board died and came back on ,...

Ok I went there today , walk up to unit and its in wash mode. Cook tells me it was beeping when he got in and turned the switch.

Ok whatever.

I turn it to ice , it immediately begins to beep 3...

there IS a button there to reset the Alarm codes , yes , but the S3 switch is for testing purposes

PS ... I never heard any alarms , no beeps at all , but the owner did.

I guess it has to run...

He and his 4 sons did , all who are pretty smart and follow politics , and I've known for 20 years.

I asked WHY would you ??????

Basically the response was , there were Not any decent Rep to...

Ok after more reading in the handbook , Im going to give her a shot of gas to bring that suction up , switch the micro switch a bunch of times , look for bad joints on board , and see if she makes ice

Hey thats a dam good idea !!

No wait .....

Are you sure thats a good idea ....

Its a micro switch on the board , not much jumping there unfortunately



45 min seems a bit much dont it

Ok I just read in the pocket handbook it should be around 35 min , and suction around...

Im going back today and switch that switch back n fourth 50 times , then see if she makes ice

If we get ice without issue , that dip switch was it ....

I will also look for cold solder joints

wow talk about lazy

Thats exactly what its doing ..... its doing the S3 test intermittantly

The LEDs on the board are not in order , they go 2 3 4 1 , and it pauses between lights , and THATS whats lighting up when...

That explains the sticker i saw , Made For USA

what the hell ..... I never got my 30 pounds jug with any of my units .... I been getting ripped off all these years !!!!

This ones killin me

KM630 M W H .... water cooled cuber ice machine

Get there and machine is off. Owner says it was beeping at him when he came into work. I asked , did you happen to count...

I bubble shraders BEFORE i put hoses on

But i dont use much , just wet my finger and hold it on the valve so I dont get any drops inside the shrader.

Dont want bubbles to enter the system...