Search:

would like to thank those that helped here---have 4 interviews next week---see what comes about

Moving to Charleston SC area --Looking for Commercial Job---chillers, control,towers etc. etc

Anybody have openings in Charleston, S.C. area--or know of a good company to go to???

thanks--I knew it was the wrong place--just shot it out there---will go

Hate to ask this here--but any plumber in here that know of a shower handle escutcheon that has a locking ring with it--I.E. shower handles float in wall---and its an out side wall--so ripping it is...

Had a chiller under ground---had to warranty change out a condenser motor---had to shimmy with tools above my head--it sucked--but was funny at same time---I'll see if I can find the pic

I can give all the info you want--wb-db-sh-sc-amps--but the question is shut down no probs with unit running or cutting out-

yep---call for heat and fan satisfied--at the leds in air handler---yes new install--variable speed fan goes from normal operation to slow and out door unit continues to run for about 10 minutes and...

no actually was sequence of operation---after call for heat (hp) and fan go away--the fan(variable) runs low speed and hp continues to run--it does eventually shut down---so the question is---is that...

any armstrong guru's on here? have a question about unit cycling--I.E. shuting down after call for heat

had a boiler kick my butt for a week--replaced a lot of parts and cleaned everything-twice and it still failed to lit off--turns out the ignitor had been there for so long it actually blasted away...

currently they have 53 refrigeration jobs open and 0 hvac jobs--I'll bookmark them though--Thanks

Thank you and sent a pm to you as well

primarily in hotels (400 rms or greater)--have been traveling from northern VT to Fla

for the last few years I have been working with line carrier systems

what is the majority of systems you have?? Have done my fare share of controls--just wasn't my primary

Any commercial jobs in South Carolina - preferably near Ladson/Charleston area

I have a shelf ful lof manuals Ranging from lieberts to chillers--23xl service/repair/rebuild, toshiba e3 drives, I thing I even have vvt system 1,2, and 3. Since I am not in that field anymore and...

still have the freezer???

yep---if you got material in the tubes------HAVE fun, new headers and the joy of cutting all the u-bends off-cleanignt he tube and re-installing the new u-tubes and and headers

been there--done...

I'm in central east----where is beaver county

I'm a high tonnage chiller tech--if you have an idea please post
TKS

anyone help me with a Lennox heat pump condenser, Tripped the breaker on the transformer, poked around anf found Y1 on the condender grounded, checked contactor(ok), disconnected Y1 in the A/H and...

Know all about the turbocor--I worked for McQuay for a couple of years

[Edited by rimide on 07-10-2006 at 09:44 PM]

on that multistack is that a Hitachi screw