Type: Posts; User: traverse tech
Which Supply house has an ad out. Youngs, Johnstone, Midwest, or BY.
UA LU 85 Saginaw MI
Just competed last week. It was a great time it was tough and worth every minute. Everything from no heat, no cool calls to replacing valve plate, to rigging and pipefitting and written test.
we have done it both ways. Never seemed to matter but we changed the oil on the good compressor besides changing out the bad. Both ways we have never had a problem.
I just use water the only equipment I have used coil cleaner on was a Air Cooled Centravac and I still don't know if it worked better then Water. Volume and pressure is the key
All you need to find out the size is the compressor model number.
I am orig. from the Grand Haven area and my grandpa worked for them. They have been out of business for at least 20 years if not more.
The protocol I was working on is pre-pcs controller. There website only has pcs controller manual.
It maybe the same thing as the pcs unit but there is nothing digital about the...
Do you guys know where I can get a manual for a Protocol
I got called out to work on one of these today and found NO condenser motors running. Disconnected power to...
I have exhausted google tonight looking for a manual wondering if you guys can help me
Very well said. Went union 4-5 years ago I have switched companies once but all for the better for me.
Don't agree with the politics of the union. But I work for a GREAT company....
The PK I have worked all have had a light off position with the damper as well has high fire and low fire position. Need to know the cabinet pressure???
Then some combustion readings. Take care...
I will let you know what happens. Shut-down is this weekend. I figure it has been over drilled. It has a HMA burner and they said they drilled it out with a 1/8 drill should have been a...
I have a weather rite
2.1 million BTU
.5 diff across burner
15 degree temp rise on low fire
110 on high fire
Worked on several brands.
I like Rapid for my first choice but Weather Rite isn't bad either. Another one could be Absolute Air.
How much have you guys worked with this system. I noticed today All 3 zones are in alarm and the maverick zone not responding. Didn't have time today to dig into it. Just had to many Makeup airs...
Ferris State is a good one. But since your in Alabama I sure hope he likes cold and snow already had one frost up here in the North. I live about 1hr 20 mins. from Ferris to the North.
Turn it on and then finish charging with liquid. Not to hard to do or pump it into the unit from the tank with reclaimer.
I had no problem getting in. Start with the contractors first then the hall.
I still wasn't there in archive.
Called McQuay today and finally got it. Had to type 483 in the text search to find it. How are suppose to know that????
Your correct glad...
Thank you Absrbrtek
Already tried that but since its a Mircotech 2 vintage there isn't an IOM on the website I can find. I would have never came on here and asked the question if I could have found it on there site.
I have a McQuay RTU
Looking for the IOM for this RTU.
Okay guys I have a Bristol H2NG184GPDF
During the switching from low speed to high speed the compressor is slamming to high speed.
Now I believe I am getting drag with the switching contactors...
klove has it right on.
without all the info he list your not going to be doing the job right.
I am in training to be a test and balance tech. What different world but I hope after I am done...