I had a friend give me a small GE Refrigerator that He said is low on 134A. I was going to try to get it running. I am a residential guy so I thought I would ask the refrigeration experts. What...
Type: Posts; User: Tex76
I had a friend give me a small GE Refrigerator that He said is low on 134A. I was going to try to get it running. I am a residential guy so I thought I would ask the refrigeration experts. What...
Again it is most likely is the defrost board bad. Get a professional out to make the repair. The coil iced up indicates the unit not going into defrost mode. if the defrost clamp on stat is made...
Congratulations! I have 2 boys 5 and 2. They are the joy of our life! Many good times to come! Cherish each moment time goes by too quick!
I agree with armament, but I would also suspect defrost t-stat, Defrost board, or both.
If I am pulling a vacuum through a 2-valve manifold those two 1/4 inch hoses one to high-side one to low-side are pulling through the 1/4" port in middle of the manifold. So by using yellow jacket...
You are right the reason that a by-pass damper is there is to circulate excess air of the blower output across the coil when only one or sometimes two zones are calling. You must have at least...
On the yellow jacket tree there are two 3/8 branch ends that go to the system. One going to high side 1/4 inch the other to the low side 1/4 inch. I will probably have to get two 1/4 inch hoses and...
I forgot to mention that I am working on getting my posts up so I can be accepted into professional forum. I cant wait. I just have to get use to getting on the computer more. I tend to go to...
Do you use 3/8 by 1/4 metal hoses with the tree to perform a blank off test because charging hoses will not hold a deep vacuum. You can pull a vacuum through charging hoses(manifold hoses) but cant...
I would request heat loss/gain calcs from both contractors. Compare unit outputs to loss/gain calcs of house load. This is to determine whether you need a 3 ton or 4 ton unit. You just want to...
In performance no difference between vertical vs horizontal as long as designed properly. However the cost of the vertical will generally cost more due to drilling costs. You will be putting more...
I am looking at speeding my vacuum time with replacing my 2-valve manifold with JB Zeppelin 4-valve manifold. This gives me a 3/8 port to evacuate with instead of 1/4 inch that chokes the flow. I...
I forgot to answer a question. I will assume I will be doing a little more ref. work in the future although my expertise is in HVAC and Geo-exchange residential. I do take pride in learning the job...
First of all I will apologize. I did not mean to say I was making a living and you guys are not I know that is not the case. Thank you for the help. I am sorry I have no more information for you...
sorry took so long to get back on-line. Been out making a living. Ok I get it about just using the gauges I got and pt charts. I guess I just get my superheat back to compressor and the liquid sub...
Make sure Honeywell Zone board in installer set up menu is set up were t-stats are controlling equip not time staging. May have to get the installer to do that.
Thank you every one for the advice. I will continue to learn from this experience. The condenser is outside and I did not want to put my dedicated 410A or R22 gauges on this system because I do not...
Yes I Liquid charged as the bottle directed. I did inform them that the leak needs to be found and repaired and we will do that in the future. If I continue to work on their refrigeration equip I...
No other way to cook! I have done it all in a dutch oven. Biscuits, cakes, pies, stews, soups, oh and cobblers. I use a hanging hook system to control heat. The keys keep ovens cured, watch and...
We have been doing work for a hospital in our local area. It snowed 3 ft. they could not contact anyone. Their walk in Refrigerator was above 40 deg. They called me to come get it going. They...